Products

Mask Bacterial Filtration Efficiency Bfe Detector Tester ISO/Dis 22611

China Mask Bacterial Filtration Efficiency Bfe Detector Tester ISO/Dis 22611, Find details about China Astmf2101 En 14683 Q/0212 Zrb003, Astmf2100 Astmf2101 En14683 from Mask Bacterial Filtration Efficiency Bfe Detector Tester ISO/Dis 22611

Model NO.
DRK1000
Control
Computer Control
Weight
100-500Kg
Power Source
AC220V
Power Consumption
<1500W
Size of Supporting Frame
1180*650*600mm
Trademark
Drick
Transport Package
Wooden Case
Specification
1180*650*1300mm
Origin
Jinan, Shandong
Model NO.
DRK1000
Control
Computer Control
Weight
100-500Kg
Power Source
AC220V
Power Consumption
<1500W
Size of Supporting Frame
1180*650*600mm
Trademark
Drick
Transport Package
Wooden Case
Specification
1180*650*1300mm
Origin
Jinan, Shandong

 

DRK-1000 Mask bacterial filtration efficiency (BFE) detector tester 
 
 
Product Introduction
 
DRK-1000 type mask bacteria filtration efficiency key performance indicators (BFE) detector not only conforms to the requirements of medical surgical masks technology YY0469-2011 appendix B in the test method for filter efficiency (BFE) bacteria first b. 1.1.1 test instrument, but also conforms to the American society for testing material ASTMF2100, ASTMF2101, the requirements of the European EN14683 standards, innovative improvements were made on the basis of this, with double pneumatic contrast sampling method at the same time, improve the precision of sampling,It is suitable for measuring and testing departments, scientific research institutes, mask manufacturers and other relevant departments to test the performance of mask bacterial filtration efficiency.
 
Technical Standard
Q/0212 ZRB003-2015 Medical surgical mask bacterial filtration efficiency (BFE) detector
ISO/DIS 22611: 2003--Resistance to penetration by biologically contaminated aerosols method
ASTMF2101 EN 14683
 
Features
1.Negative pressure test system to ensure the safety of operators;
2.Built - in peristaltic pump in negative pressure cabinet, A, B two - way, six Andersen;The peristaltic pump flow can be set;
3.The flow rate of night spray can be set and the atomization effect is good. 4.Embedded high speed industrial microcomputer control;10.
4 inches industrial high brightness color touch screen;
5.USB interface, support U disk data storage;
6.Cabinet built-in high brightness lights;Built-in leakage protection switch to protect the safety of operators;
7.The inner layer of the cabinet is made of stainless steel, the outer layer is sprayed with plastic and cold-rolled, and the inner and outer layers are insulated and flame retardant. 
8.The front switch type glass door is convenient for the experimenter to observe and operate.
9.Detachable bracket, adjustable bracket height;Supporting and moving dual purpose casters.
 
Product Parameters
 
A Route Sampling Flow: range 28.3L/min; resolution 0.1L/min; accuracy Within ± 2.5%.
B Route Sampling Flow: range 28.3L/min; resolution 0.1L/min; accuracy Within ± 2.5%.
Spray Flow: range (8~10)L/min; resolution 0.1L/min; accuracy Within ± 2.5%.
Peristaltic Pump Flow: range (0.006~3.0)L/min; resolution 0.001ml/min; accuracy Within ± 2.5%.
Front Pressure of A Route Sampling Flowmeter: range(-20~0)kPa; resolution 0.01kPa;accuracy Within ± 2.5%
Front Pressure of B Route Sampling Flowmete: range(-20~0)kPa; resolution 0.01kPa;accuracy Within ± 2.5%
Front Pressure of Spray Flowmeter: range (0~300)kPa; resolution 0.01kPa;accuracy Within ± 2.5%
Ambient Temperature: range (-40~99)ºC kPa; resolution 0.1ºC;accuracy Within ± 2.5%
Negative Pressure of the Aerosol Chamber: range (-90~-120)Pa; resolution 0.1Pa;accuracy Within ±2.0%
Negative Pressure of the Cabinet:-50~-200pa
Data Storage Ability: >100000 sets
Vortex Mixer Test Tube Specification and Quantity: Φ16×150mm test tube,8pcs
High Efficiency Particulate Air Filter Properties: Filter Efficiency≥99.99% for particles> 0.3μm
Median diameter of aerosol generator mass: Average diameter:(3.0±0.3)μm;Geometric Standard generator mass Deviation≤1.5 Double Routes 6-lever Andersen Sampling apparatus: Level 1>7μm; Level 2: (4.7~7)μm; Level 3: (3.3~4.7)μm; Level 4: (2.1~3.3)μm; Level 5: (1.1~2.1)μm; Level 6: (0.6~1.1)μm
Size of Aerosol Chamber: 600×85×3mm (Length×Diameter×Thickness)
Total number of positive quality control sampler particles: (2200±500)cfu
Negative Chamber Flow Speed: ≥5m3/min
Size of Negative Pressure Chamber Door(W×D): 1000×730mm
Size of Main Machine(W×D×H): 1180×650×1300mm
Size of Supporting Frame(W×D×H): 1180×650×600mm, Height within 10cm is adjustable
Noise of the Tester: <65dB(A)
Weight: 150kg
Power Supply: AC220V±10%, 50Hz
Power Consumption: <1500W

Our Company

Drick Real-Time Display Tensile Strength Tester
Shandong Drick Analytical Instrument Co., Ltd is a professional manufacturer of laboratory & industrial test equipment since 2004, our main products involved Paper & Packaging Testing Machines, Rubber & Plastic Testing Machines, Food & Medicine Testing Machines and Environmental Testing Machines , and widely applied to many fields, such as R & D Institution, quality test department, university.
Our factory is located in Tianqiao district, Jinan city, while our head office is located in high-tech district, Jinan city.
We have more than 100 members, including 8 super R & D engineers, we offer one stop laboratory & industrial equipment solution, our customers come from all over the world, we have a strong team which consist of sales department, technical guide department and after-sale service department.
Our tenet is to serve all the customers, for customers everything. 
We sincerely hope we can set up a long term cooperation with each other, we will serve you heart and soul, welcome to Drick.

Our Team / Exhibition
Drick Real-Time Display Tensile Strength Tester

Drick Real-Time Display Tensile Strength Tester
Packaging

Drick Real-Time Display Tensile Strength Tester

FAQ
1. How about your delivery?
Generally speaking, we will deliver the goods after received you money ( pre-paid or 100% ) within 15 days, we need time to produce the machine.If the goods in stock, we can delivery the goods once received money from you, the delivery of customized one would be longer since that's not standard machine, we need to produce according to your requirements.
2. Which shipment way do you have?
Sea way, air way, express ( DHL / TNT / UPS/ FeDex )
3. How can I pay for the money?
T/T, Alibaba Trade Assurance as default.
4. Do you offer after-sale service?
Of course, we have professional team to serve you after-sale.
5. What's the warranty of your machine?
Most of them are one year warranty.
6. Do you have CE certificate or vertified by other institutions?
Yes, we have many goods vertified by CE, ISO9000.
7. Do you accept customized service with my own Logo?
We can add your Logo on the machine.
8. Do you accept partial payment?
Available, we will produce the machine after received your pre-paid money, balance should be arrived before shipment.
9. What's the MOQ of your machine?
Most of our products can be start with one unit as default, except customized difficult one, more details, please contact our sales representatives.
 

You Might Also Like