Die Cutting Machine for Sponge/Foam

Functional Characteristics:

1.Driven by hydraulic pressure generated by motor, adopts advanced dual oil cylinder and hydraulic circuit,causes low heat while operates at a speed of more than 150mm per second;

2.Hydraulic pressure actuation of 1-14MPA, three-phase alternating current supply, AC380V 50HZ or AC220 60 HZ, total consumptions of electricity of less than 3.7KW(Power supply as per customer request also).

3.The frame adopts integrity welding technology with better regidity and stability of machine while wide convenient operation space;

4.Pressing force, stroke of cutting, dwell time, die height could be adjusted manually comply with practical demand;

5.Intelligent functions: intelligent counter, force measurement monitor, intelligent temperature controller(Customized available).

6.Range of output force: 15ft-100ft.(Optionally).

Main Technical Parameters:

(Technical parameter can be customized according to your special need ):

1.The upper beam and cutting bed are the same size that is large enough for cutting foam .
2.The cutting die can be mounted up or down.
3.The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.
4.Material feed systems can handle rolls or sheet format, automatic or manual operations.
5.Any specifc requirement of production can be custom built.

Model	Working Area	Max Tonnage	Max spacing	Drive Motor	Weight	Outline Dimension	Position Accuracy	Power
DP-650P	600mm*650mm	40t	100mm	10HP/7.5KW	2.8 Ton	1300mm*1200mm*1800 mm	±0.01 mm	380V 50HZ
DP-650P	600mm*800mm	40t	100mm	10HP/7.5KW	3.1Ton	1300mm*1450mm*1800 mm	±0.01 mm	380V 50HZ
DP-650P	600mm*1000mm	60t	100mm	10HP/7.5KW	4.2Ton	1300mm*1700mm*1800 mm	±0.01 mm	380V 50HZ

Control Panel :