Products

300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c

300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c

China 300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c, Find details about China High Pressure Reactor, High Pressure Reactor Autoclave from 300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c

Model NO.
CY-1100X
Model NO.
CY-1100X
Descriptions of high pressure Reactor:
CY-1100X is a 300 mL reactor made of Ni-based Superalloy, which has excellent creep strength and anti-oxidation.
It can reach 1100 °C with a pressure up to 3 MPa under oxygen or inert gasses. It is an ideal tool for preparing advanced material by the hydrothermal method,
especially for heat treatment of sample under high oxygen pressure. A solenoid valve is installed on the flange for automatic pressure relief control.
Temperature control and pressure monitoring software are included for remote control. 
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c



Technical Parameters:
Features
  • Reactor made of Ni-based superalloy, which allows high pressure at high temperature (up to 3 MPa at 1100 °C)
  • Over-temperature alarm and interlock are installed for safe operation
  • Over-pressure alarm is installed. A solenoid valve is installed for automatic pressure relief
  • Temperature control and pressure monitoring software are included for remote control
Structure
 
  • Please click drawing left to see detail structure
  • Warning #1: For your safety, never face on top flange without protective wear. 
  • Warning #2: The high-pressure vessel and furnace must be placed inside an explosive-proof box or case during using under high pressure. 
Input Power
  • Input voltage: 208 - 240 VAC, 50/60 Hz, single phase1.5 kW power
Pressure Vessel
 
  • Ni-based superalloy hydrothermal reactor with 300 mL capacity. Attention: Processing vessel is consumable, you can click the left picture to order replacement or a spare one
  • Made of Ni-based superalloy GH747Reactor size: 70 mm OD x 35 mm ID x 326 mm H
  • Air cooled flange via aluminum heat radiator
  • A small quartz or alumina boat should be used to load the sample inside the reactor, which increases vessel service life
  • Gold or Ni foil can be used to wrap the crucible boat to minimize contamination to the vessel
  • It is customer responsibility to find suitable liner for different material for hydrotheral crystal growth.
  • Optional torque wrench is available to avoid overtightening the flange bolts
Working Pressure
  • 18 MPa            ≤ 800 °C
  • 13 MPa            ≤ 900 °C
  • 8 MPa              ≤ 1000 °C
  • 3 MPa              ≤ 1100 °C
Pressure Monitoring and Relief
  • Precision high pressure sensor (measurement range up to 25 MPa, or 250 bar) is installed on the pressure vessel. The pressure monitor displays pressure in bar
  • Pressure monitor allows the user to set a high pressure alarm. When the pressure reaches the alarm set point (15 MPa max), alarm will sound and the pressure will be released via a solenoid valve on the flange. For using the reactor with a pressure > 15 MPa at low temperature, please shut off the needle valve near the solenoid valve and use the manual pressure relief valve
Temperature Control & Heater   
  • Working temperature: 1100 °C max (< 1 hour). Continuous working temperature: ≤ 1000 °C
  • Heating/cooling rates: ≤ 10 °C/min
  • Heating zone length: 330 mm
  • Constant temperature zone: 80 mm within +/- 1 °C
  • Heating element: Fe-Cr-Al alloy
  • Thermocouple: K-type (Omega3 mm OD K Type with high-temperature tolerance (220°C) connector)
  • One digital temperature controller with 30 programmable segments and +/- 1 ºC accuracy 
PC Control (optional)
  • CY-02control software is available for real-time controlling and monitoring temperature and pressure by a computer.
Accessories
 
  • SS316 needle valve with 1/4 pipe connector & pressure gauge are included
  • Two consumable Copper Gasket (63 mm OD) are included
Size
  • 340 mm W x 320 mm D x 820 mm H
Net Weight
  • 35 kg
Warranty
  • One year limited warranty with lifetime support
 
Application Notes:
  • The recommended temperature heating/cooling rate is 5~10 ºC/min
  • DO NOT over tighten the flange screws as this may cause permanent damage to the flange or screws.
  • Please refer to the instruction about proper torque for installing CF flange bolts. 
  • We recommend you to use a torque wrench to tighten the screws with the flange
  • DO NOT use the pressure relief solenoid valve.to vent the vessel! It could contaminate the valve and impact its service life.
  • Always use the manual pressure relief valve for venting
    Warning:   For your safety,  the high-pressure vessel must be placed inside an explosive-proof box or case during using under high pressure.  
  • Never face on top flange without protection to avoid the accident. 
Material preparation:
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c

Foil and copper gasket:
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c
Temperature monitoring:
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c
Real time monitoring:
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c

Contact Information:
300ml Ni-Based Super-Alloy High Pressure Laboratory Hydro-Thermal Reactor Autoclave 1100c



 

You Might Also Like