Products

Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs

China Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs, Find details about China Sequential Timer Controller, Sequence Time Controller from Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs

Model NO.
8 point sequence controller
Condition
New
Customized
Customized
Material
Stainless Steel
Trademark
BONWAY
Transport Package
Carton
Specification
40X40X40 cm
Origin
China
HS Code
847790
Model NO.
8 point sequence controller
Condition
New
Customized
Customized
Material
Stainless Steel
Trademark
BONWAY
Transport Package
Carton
Specification
40X40X40 cm
Origin
China
HS Code
847790

Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs
Detail product description

 

Hot Runner Sequential Timer Controller:

 

Integrated valve sequence time controller is dedicated to valve gate hot runner system. According to the injection molding machine signal, the valve pin action is accurately multi-stage, delay control. The controller is equipped with a high-power power supply, It can drive 8 zone air valves or oil valves at the same time. The delay precision reaches 0.01 seconds, the display is intuitive, the operation is simple, safe and practical.

 

 

Product name:SEQUENCE INJECTION CONTROLLER
Zone:4 Zone or 8 Zone
Product Specifications:
Main Power Input:AC220V(50-60HZ)
Signal Input Power:DC24V or AC220V
Solenoid Valve Output Power:DC24V(less than 100mA per Gate) or AC220V(total less than 1A)
Delay setting range(accuracy):999s(1s) or 99.9s(0.1s) or 9.99s(0.01s)
Operating ambient temperature:-10ºC-50ºC


Product Description:

Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE CertsSequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs
1. Voltage output status indication
2. Signal indication
3. Mode function button
4. Manually open the button
5. Direction button and confirm button
6. Switch button


Wiring Method
Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs
Products Photos:
 
Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs
Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs
Appications:
Sequence Injection Controller Hot Runner System Manufacturer Popular in Europe with CE Certs



 

Please read the following carefully before using.
 

1Hydraulic valve shall not exceed 350 watts total power, 14.6A
2Make sure the voltage of the solenoid valve is consistent with the sequential controller voltage before use,
3Be sure to turn off the power when switch voltage (24V ↑ or 220V ↓). Otherwise easily burn.
4Power supply: 220V
5Please wiring by wiring on the machine.
6Operation:
1)AB mode or off operation: Press MODE key to enter the boot (AB indicator flashes) and press the left and right shift key to switch
2)Decimal point switch: boot press the down key, then press the MODE key to enter (show UNIT999) and press the left and right keys to change the decimal point position.
3)Time adjustment: boot press down key, then press the ENTER key, then press the arrow keys to adjust the time.
4)OPEN, usually before accepting the injection molding machine signals used to check the operation of the valve pin.

If needed to open the cover plate for mode configuration or repair, be sure to disconnect the power supply of the equipment, otherwise there will be the risk of electric shock.
 

You Might Also Like