Customized Hot Runner Spring Type Nozzle Heater Applied for Mould Injection
China Customized Hot Runner Spring Type Nozzle Heater Applied for Mould Injection, Find details about China Non-Corrosive, Good Thermal Insulation Effect from Customized Hot Runner Spring Type Nozzle Heater Applied for Mould Injection
Basic Info.
Model NO.
COIL
Min. Inner Diameter
8mm
Sheath Material
SS304
Insulation Material
High Pure MGO
Resistance Wire
Cr20ni80
Max. Sheath Temp.
700degrees
Dielectic Electrical Strength
800V A/C
Dimensional Tolerance
Coil ID. +/-0.1~+/-0.2mm; Coil Length. +/-1mm
Wattage Tolerance
+/-10%(+/-5% Available Upon Request)
Voltage & Wattage
12-380V/70-1000W
Trademark
Thermal International
Transport Package
Polybag and Outer Carton or Wooden Case
Origin
Guangzhou, China
HS Code
8516800000
Model NO.
COIL
Min. Inner Diameter
8mm
Sheath Material
SS304
Insulation Material
High Pure MGO
Resistance Wire
Cr20ni80
Max. Sheath Temp.
700degrees
Dielectic Electrical Strength
800V A/C
Dimensional Tolerance
Coil ID. +/-0.1~+/-0.2mm; Coil Length. +/-1mm
Wattage Tolerance
+/-10%(+/-5% Available Upon Request)
Voltage & Wattage
12-380V/70-1000W
Trademark
Thermal International
Transport Package
Polybag and Outer Carton or Wooden Case
Origin
Guangzhou, China
HS Code
8516800000
Product Desciption
Product Description
1. Introduction:
When thicker metal in an alternating magnetic field, it will produce electric current .The metal current become stronger , temperature of metal became higher. The device is a kind of energy-saving equipment . it is installed in the combustion equipment before combustion, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full combustion . Hot Runner Coil Heater are widely used in hot-runner molds,blow molding,extrusion and hot nozzles.The hot runner heaters are annealed to acquire malleability for bending into any shape. Injection molding coil heaters with thermocouple are also available.
2. Technical parameters:
3. Product display:
4. Product features:
Insulation material:
1,Conductor insulated (PVC, Fiberglass, Teflon)
2,Jacket / Overall insulated (PVC, Fiberglass, Teflon)
3, Shield / Overbraid (Stainless steel or tinned copper)
The main determining factors of what type thermocouple needs to be used in a application is temperature, environment, response time and accuracy. The junction of the thermocouple can be grounded, ungrounded or exposed. The thermocouple junction may be of many different styles, from tube type to a washer configuration.
Product use: for gas cookers, gas oven, outdoor heaters, volumetric gas water heaters and remove protection device.
5. Applications:
1. Injection moulding machine nozzle
2. Hot Runner Nozzles & Bushings.
3. Packaging machineries
4. Hot runner Injection moulds.
5. Injection & Blow Moulding Machine Nozzles.
6. PET prefrom & Thin wall container Moulds
7. Hot runner Manifolds.
6. Related products:
7. Certificate:
8. Order instruction:
When inquiry, pls kindly let us know the below:
About Us:
Company profile:
Shenzhen Thermal International is a comprehensive company which integrates domestic and foreign trade production and sales into a modern enterprise system. Our main products are all kinds of high-efficiency energy-saving and green electric heating element, including the domestic heating element as well as the industrial heating element, such as cartridge heater, tubular heater, immersion heater, hot runner/coil heating element and thermostats, switches, timers of various specifications. At the same time, if you have any specific requirements, our professional technical team will provide you with one-stop service from design to production, installation and debugging.
Our company has continuously digested and innovated and introduced the most advanced foreign production equipment and technology, which has won the trust and trust of the vast number of customers. Most of our products are exported to Europe, America, Southeast Asia, middle east and other countries. And we've established scientific production management, perfect quality management system and after-sales service - aims to offer the most professional & considerate service and products. We've introduced in many talents, and at the same time, we have obtained ISO9000, CE, SGS, explosion-proof secondary certificates and other certifications. We're in hope of establishing friendly win-win business relationship with customers from home and abroad.
Catalogue:
a. Thermostat (KSD/KST/JPC/NTC/Capillary thermostat)
b. Industrial heating element
c. Domestic heating element
d. Mechnical timer
e. Switch(Rocker switch, Micro switch, Rotary/Position switch)
f. Indicated lamp etc.
Notes: We offer OEM Service. We can make the product as per customers' requirements.
1. Introduction:
When thicker metal in an alternating magnetic field, it will produce electric current .The metal current become stronger , temperature of metal became higher. The device is a kind of energy-saving equipment . it is installed in the combustion equipment before combustion, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full combustion . Hot Runner Coil Heater are widely used in hot-runner molds,blow molding,extrusion and hot nozzles.The hot runner heaters are annealed to acquire malleability for bending into any shape. Injection molding coil heaters with thermocouple are also available.
2. Technical parameters:
| Item description | Spring coil element |
| Main application | Mainly used in injection moulding machine, hot runner nozzles and bushings, packaging machine, hot runner injection moulds, injection & blow moulding machine nozzles, hot runner manifolds etc. |
| Sectional area | 3X3, 4.2X2.2, 4X2, 4X2.7, 4X2.5, 3.3X3.3, 3.5X3.5 |
| Min. Inner Diameter | 8mm |
| Sheath material | SS304 |
| Insulation material | High pure MgO |
| Resistance wire | Cr20Ni80 |
| Max. Sheath Temp. | 700degrees |
| Dielectic Electrical Strength | 800V. A/C |
| Dimensional Tolerance | Coil ID. +/-0.1~+/-0.2mm; Coil Length. +/-1mm |
| Wattage tolerance | +/-10%(+/-5% available upon request) |
| Voltage & Wattage | 12-380V/70-1000W |
| Build-in thermocouple power | With or Without J/K Type Thermocouple. |
| Sheath length | 500/1000/1200/1500/2000mm |
| Available Sheath Material | Stainless steel braided/Fiberglass braided/Silicone sheath/Armor sheath/Dual terminal/Dual terminal teflon insulated. |
3. Product display:
4. Product features:
Insulation material:
1,Conductor insulated (PVC, Fiberglass, Teflon)
2,Jacket / Overall insulated (PVC, Fiberglass, Teflon)
3, Shield / Overbraid (Stainless steel or tinned copper)
The main determining factors of what type thermocouple needs to be used in a application is temperature, environment, response time and accuracy. The junction of the thermocouple can be grounded, ungrounded or exposed. The thermocouple junction may be of many different styles, from tube type to a washer configuration.
Product use: for gas cookers, gas oven, outdoor heaters, volumetric gas water heaters and remove protection device.
5. Applications:
1. Injection moulding machine nozzle
2. Hot Runner Nozzles & Bushings.
3. Packaging machineries
4. Hot runner Injection moulds.
5. Injection & Blow Moulding Machine Nozzles.
6. PET prefrom & Thin wall container Moulds
7. Hot runner Manifolds.
6. Related products:
7. Certificate:
8. Order instruction:
When inquiry, pls kindly let us know the below:
Volts&Watts
Inner dia of coiled heater : I.D (Or) Outer diameter of nozzle to be heated
Height of coil
Connection lead option and leading wire length
Type of the thermocouple (J type or K type)
Drawing or sample for special type
Quantity
9. Packaging & Delivery:
About Us:
Company profile:
Shenzhen Thermal International is a comprehensive company which integrates domestic and foreign trade production and sales into a modern enterprise system. Our main products are all kinds of high-efficiency energy-saving and green electric heating element, including the domestic heating element as well as the industrial heating element, such as cartridge heater, tubular heater, immersion heater, hot runner/coil heating element and thermostats, switches, timers of various specifications. At the same time, if you have any specific requirements, our professional technical team will provide you with one-stop service from design to production, installation and debugging.
Our company has continuously digested and innovated and introduced the most advanced foreign production equipment and technology, which has won the trust and trust of the vast number of customers. Most of our products are exported to Europe, America, Southeast Asia, middle east and other countries. And we've established scientific production management, perfect quality management system and after-sales service - aims to offer the most professional & considerate service and products. We've introduced in many talents, and at the same time, we have obtained ISO9000, CE, SGS, explosion-proof secondary certificates and other certifications. We're in hope of establishing friendly win-win business relationship with customers from home and abroad.
Catalogue:
a. Thermostat (KSD/KST/JPC/NTC/Capillary thermostat)
b. Industrial heating element
c. Domestic heating element
d. Mechnical timer
e. Switch(Rocker switch, Micro switch, Rotary/Position switch)
f. Indicated lamp etc.
Notes: We offer OEM Service. We can make the product as per customers' requirements.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle