The dawn dusk for lighting LP-106, LP-116 and LP-126 are applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.

They are designed on the basis of electrical heating structure that provides time delay over 30 seconds to avoid redundant switching against spotlight or lighting or lightning during the night time.A temperature compensator system provides consistent performance regardless of the ambient temperature.

They are convenient for direction adjustment after installation once an additional swivel is applied.

Installation & Operational Instructions
Disconnect power, place strew thread of the SWITCH in knockout hole and fasten with rubber gasket and Zinc alloy lock-nut.
Wire according to the diagram.
Slide the mounted adjusting metal strio to have preferred On/Off levels, if necessary.
Do not install the switch with the Photocell facing artificial or reflected light.This will cause the unit o cycle on and off at night.

Initial Testing
It is normal for the SWITCH to take several minutes to turn off when first installed.
To test"turn on" during daytime, cover its eye with sliding the metal strip mounted.
Do not cover with finger because light traveling through fingers may be keep the switch open.
Test will take approximately 2 minutes.



Shanghai Lipu Electric Lighting Co., Ltd. founded in 2001, and specialized in producing Smart Light ,Solar Light,LED flood lights, LED street lights, all kinds traditional outdoor lighting products such as flood lights, street lights, factory lights and its accessories like ballast, ignitor, capacitor, lamps, photocontrol etc. The home automation products such as LED ceiling lights have also been researched and produced.