Products

DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply

China DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply, Find details about China Switch Power Supply, SMPS from DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply

Model NO.
MDR-60-12
Brand
Trihero
Output Current
5A
Output Frequency
50/60Hz
Protection
Short Circuit & Overload
Efficiency
88%
Origin
Zhejiang
Model NO.
MDR-60-12
Brand
Trihero
Output Current
5A
Output Frequency
50/60Hz
Protection
Short Circuit & Overload
Efficiency
88%
Origin
Zhejiang

DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply

DIN rail plastic enclosure 60w 120vac to 12vdc switching power supply

 

Features:

1. AC input range selectable by switch

2. Protections: Short circuit / Overload / Over voltage / Over temperature

3. 100% full load burn-in test

4. Low cost, high reliability

5. 24 months warranty

 

MODELMDR-60-5MDR-60-12MDR-60-24MDR-60-48
   OUTPUTDC VOLTAGE5V12V24V48V
RATED CURRENT10A5A2.5A1.25A
CURRENT RANGE0 ~ 10A0 ~5A0 -2.5A0-1.25A
RATED POWER50W60W60W60W
RIPPLE & NOISE (max.)80mVp-p120mVp-p150mVp-p200mVp-p
VOLTAGE ADJ. RANGE5 -6V12-15V24 - 30V48 ~ 56V
VOLTAGE TOLERANCE±2.0%±1.0%±1.0%±1.0%
LINE REGULATION±1.0%±1.0%±1.0%±1.0%
LOAD REGULATION±1.5%±1.0%±1.0%±1.0%
SETUP, RISE TIME Note.5500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)50ms/230VAC 20ms/115VAC at full load
     INPUTVOLTAGE RANGE85 - 264VAC 120-370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)78%86%88%87%
AC CURRENT (Typ.)1.8A/115VAC 1A/230VAC
INRUSH CURRENT (Typ.)COLD START 30A/115VAC,60A/230VAC
LEAKAGE CURRENT<1mA/240VAC
 PROTECTIONOVERLOAD105 - 150% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
OVERVOLTAGE6.25-7.25V15.6 - 18V31.2-36V57.6 - 64.8V
Protection type: Shut down o/p voltage, re-power on to recover
FUNCTIONDC OK SIGNALRelay contact rating (max.): 30V/1A resistive
ENVIRONMENTWORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85°C, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/°C (0 - 50°C)
VIBRATIONComponent: 10 - 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
   SAFETY &EMCSAFETY STANDARDSUL508, UL60950-1, TUV EN60950-1 approved
WITHSTAND VOLTAGEl/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC
ISOLATION RESISTANCEl/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH
EMC EMISSIONCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
EMC IMMUNITYCompliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
    OTHERSMTBF299.2K hrs min. MIL-HDBK-217F (25°C)
DIMENSION40*90*100mm (W*H*D)
PACKING0.33Kg; 60pcs/20Kg/0.82CUFT
      NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies.
5. 5.Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply
DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply
DIN Rail Plastic Enclosure 60W 120VAC to 12VDC Switching Power Supply
 

You Might Also Like