Products

Mf210 Thermal Conductive Potting Adhesive

China Mf210 Thermal Conductive Potting Adhesive, Find details about China Thermal Potting Sealant, Two-Component Silicone from Mf210 Thermal Conductive Potting Adhesive

Model NO.
MF210
Bonding Material
Glass
Delivery Time
7-10 Days
Trademark
SILANDE
Transport Package
Bottle
Specification
250g 500g 1kg
Origin
China
HS Code
3506919010
Model NO.
MF210
Bonding Material
Glass
Delivery Time
7-10 Days
Trademark
SILANDE
Transport Package
Bottle
Specification
250g 500g 1kg
Origin
China
HS Code
3506919010
MF210 Thermal Conductive Potting Adhesive
Introduction:
MF210 is a two-component silicone potting thermal conductive system. Com A and Com B is in a mass ratio of 10: 1.
MF210 thermally conductive silicone encapsulants can be cured at room temperature, but also can accelerate the curing at high temperatures. When cured, no significant contraction in varied materials.
Features:
In a wide temperature and humidity range, it can eliminate the stress arising from shock and vibration.
Good repairability; no by-products generated during curing, no solvent and deep curing.
Excellent dielectric properties, flame retardancy; excellent thermal conductivity.
Good waterproof performance; good adhesion with glass, aluminum and PC.
Purposes:
Mainly applied in power supplies, ordinary potting connectors, sensors, industrial controllers, transformers, amplifiers, high voltage resistors, relays and power module and the rectifier circuit.
Instructions:
1. Surface cleaning: To ensure a good adhesion, prior to use with a clean lint-free cloth to clean the sticky material, ensure dry and free of dirt. The solvent can be acetone, xylene and the like.
2. Com A, Com B is mixed in mass ratio of 10: 1; both automatically and manually mixing are optional.
3. Vacuum degassing for potting glue is essential in mixing.
Restrictions:
The following materials, such as chemicals, curing agents and plasticizers can inhibit MF210 thermal silicone encapsulants cure, need to pay particular attention to:
1. Organic tin and other Pb, Hg, As and other ionic compound.
2. Organotin catalysts containing silicone rubbers.
3. Containing N, S, P and other organic compounds.
4. Plasticizer containing an unsaturated hydrocarbon as well as some solder residue.
Precautions:
After a long-term place, rubber will be tiered. When using, to make it even by stirring, which does not affect the nature of the adhesive.
Storage:
12 months stored in a cool, ventilated and dry place.
Transportation:
The product is non-dangerous, can be transported by vehicles, ships, trains and other means.
Package:
A component: 10kg / barrel B component: 1kg / barrel
Mf210 Thermal Conductive Potting Adhesive

You Might Also Like