Tealth 1: 3.6 LED Increasing Dental Handpiece Contra Angle
China Tealth 1: 3.6 LED Increasing Dental Handpiece Contra Angle, Find details about China Dental Handpiece Chair, Medical Equipment from Tealth 1: 3.6 LED Increasing Dental Handpiece Contra Angle
Basic Info.
Model NO.
103L-01C
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Gear Ratio
1:5 Increase
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
103L-01C
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Gear Ratio
1:5 Increase
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Product Desciption
Tealth 1:3.6 LED increasing dental contra angle handpiece
Order code:103L-01C
Parameter:
Gear ratio:1:3.6
Chuck type: Push button
LED egenerator, Self-illuminated
Ergonomics coating ,more hygeian.
Sterilization: 135 ºC
Applicable bur :Φ1.60mm
Fitting with E type motor .
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min.At 135ºC.
Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
Tealth 1:2.7 LED increasing dental contra angle handpiece
Model:1020CHL-127
Parameter:
Push button
LED egenerator
Driving ratio:1:2.7
Ergonomics coating ,more hygeian.
Sterilization :Up to 135 ºC
Applicable bur :Φ1.60mm
Fitting with E type motor .
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min.At 135ºC.
Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
Order code:103L-01C
Parameter:
Gear ratio:1:3.6
Chuck type: Push button
LED egenerator, Self-illuminated
Ergonomics coating ,more hygeian.
Sterilization: 135 ºC
Applicable bur :Φ1.60mm
Fitting with E type motor .
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min.At 135ºC.
Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
Tealth 1:2.7 LED increasing dental contra angle handpiece
Model:1020CHL-127
Parameter:
Push button
LED egenerator
Driving ratio:1:2.7
Ergonomics coating ,more hygeian.
Sterilization :Up to 135 ºC
Applicable bur :Φ1.60mm
Fitting with E type motor .
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min.At 135ºC.
Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......