Motorized Up and down work table" ( 180~190 mm)

Working Area: 400mm*600mm (16″x 24″)

 

1. POM wheel and no drag chain structure system are adopted to reduce the x-axis movement load, and the maximum speed can reach 1200mm / s.
2. Economical RDC5121 laser cutting and engraving control system, which can support offline, support LCD display and key operation.
3. Magnetic OVERRIDE SAFETY SWITCH, more reliable.
4. 0-180mm motorized up and down platform, can meet the needs of different thickness materials for carving.

5. Air assist, attach an air compressor to our included air assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.

1. LED Light

2. Soft Close Lid Support Gas Spring Cabinet Door Safety Lift Support

Industrial laser head
Sealed laser head, has dust-proof function
Air assit function can protect the material from burning and it can let the focus lens cool down.

1. AC meter
Shows the current of laser power supply.
(It can help you judge whether the laser tube and laser power supply are normal working )

2. Up and down Switch
Pressing the switch you can adjust the table easily.

Override Safety Switch
(Top flap protection sensor)

If the top flap is opened, no data is processed. When the protection cover is opened during working the motion system is stopped and the laser source is turned off. It means the machine will stop working immediately. Only after closing the top cover, the cutting machine can restart working again. Cover protection system can protect the safety of operators and before the machine leaves the factory, this switch is OFF.

RDC 5121 Control Panel
1. Support Ligurn burn software
2. Near the Stop button is the U-Disc Interface
You can transfer your design to U-disc and the machine can work offline
3. After you suffur a power off, the machine can keep engraving or cutting from the break position when the power recover.
4. It can do multi layers work.

You can also connect the machine with PC with USB Cable.

lead screw of the mortorized table
Allows cutting and engraving different materials with different thickness
 

• Laser Engraving software Package (English Version)
• User Manual (CD)
• Water pump
• Air Pump
• Communication cable 3
• Reflect optics (installed)
• 1 Focus optics (installed)
• Other tools

CE FDA

The machine is well packed in wooden box and we buy insurance for the shipping.

Q: Do I need two laser machines to engrave and cut separately?
A: No, the laser machines we provide are capable of both engraving and cutting. One machine alone can fulfill the two purposes.
Q: Do the laser machines need to be connected to a laptop or desktop computer to work?
A: Yes, either is ok. It supports Windows 10, Windows 2000, Windows XP, Win 7, and other operating systems.
Q: What kind of graphic format does it support?
A: JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA, PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW , etc.
Q: How to distinguish laser tubes with different powers and applications?
A: 1. Laser tube length (relatively speaking, the longer, the bigger)
    2. Laser tube diameter (relatively speaking, the thicker, the bigger)
    3. The bigger a laser tube power is, the deeper the machine can cut, but its light spot is bigger. So, it is better to use a machine