Products

Aw- CSD381 Photoelectric Smoke Detector

China Aw-CSD381 Photoelectric Smoke Detector, Find details about China Smoke Detector, Smoke Detector Prices from Aw-CSD381 Photoelectric Smoke Detector

Model NO.
AW-CSD381
Operating Voltage Range
18V-28VDC
Work Current
Less Than 2.5mA
Smoke Sensitivity
0.2-0.3 dB/M
Standard Number Ref
En 57-7:2000
Standby Current
120ua@24VDC
Maximum Alarm Current
15mA@24VDC
Ec Certificate
0832-CPR-F2071
Trademark
ASENWARE
Transport Package
Standard Export Cartons
Origin
China
HS Code
8531901000
Model NO.
AW-CSD381
Operating Voltage Range
18V-28VDC
Work Current
Less Than 2.5mA
Smoke Sensitivity
0.2-0.3 dB/M
Standard Number Ref
En 57-7:2000
Standby Current
120ua@24VDC
Maximum Alarm Current
15mA@24VDC
Ec Certificate
0832-CPR-F2071
Trademark
ASENWARE
Transport Package
Standard Export Cartons
Origin
China
HS Code
8531901000

AW-CSD381 Photoelectric Smoke Detector



Aw-CSD381 Asenware Lpcb En54 Approve Conventional Smoke Detector


Introduction:
AW-CSD381 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.

The conventional rate of rise of rise heat detector uses thermal component to detect the temperature changing in the environment. It can enable fire alam when the temperature difference achieved the setting rate of rise temperature value reach the setting fixed ualue. It has a stable and reliable working performance.

Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.

The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.

Operating Voltage Range9 to 28 VDC Volts Non-polarized
Standby Current≤120uA@24VDC
Maximum Alarm Current (LED on)

≤15mA@24VDC
(1K Ohm current-limiting resistance)

Operating Humidity Range≤95%RH(40ºC±2ºC)RelativeHumidity,Non-condensing
Operating Temperature Range-10ºC to 50ºC(14ºF to 122ºF)
Smoke Alarm Sensitivity0.1-0.15dB/m
Height48.2mm installed in Base
Diameter99.45mm
Standard Number refEN 54-7:2000
EC certificate0832-CPR-F2071

Detailed Images
Aw-CSD381 Asenware Lpcb En54 Approve Conventional Smoke Detector



Certifications
Aw-CSD381 Asenware Lpcb En54 Approve Conventional Smoke Detector

Packaging & Shipping
Packaging Details:
1) PEE bag per unit 
2) Outside Cartons
3)Strict & Standard Export Packing Procedures Adopted Exterior Corrugated Hardboard Carton Interior Blister Buffer Staff, Asenware fire pump control equipment.

Aw-CSD381 Asenware Lpcb En54 Approve Conventional Smoke Detector
Aw-CSD381 Asenware Lpcb En54 Approve Conventional Smoke Detector

Our company
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

Product range
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet


Aw-CSD381 Photoelectric Smoke Detector

 

You Might Also Like