Products

Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml

China Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml, Find details about China Plastic Beaker, Laboratory Beaker from Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml

Model NO.
93-0050 93-0100 93-0250 93-0400 93-0800 93-1000
Physical Properties
Autoclavable
Sizes
Six Sizes
Trademark
Biologix
Transport Package
25 Pieces/Sleeve, 4 Sleeves/Case
Specification
50ml 100ml 250ml 400ml 800ml 1000ml
Origin
Changzhou City, Jiangsu Province, China
HS Code
3926909090
Model NO.
93-0050 93-0100 93-0250 93-0400 93-0800 93-1000
Physical Properties
Autoclavable
Sizes
Six Sizes
Trademark
Biologix
Transport Package
25 Pieces/Sleeve, 4 Sleeves/Case
Specification
50ml 100ml 250ml 400ml 800ml 1000ml
Origin
Changzhou City, Jiangsu Province, China
HS Code
3926909090
Disposable PP Autoclavable Beakers Tri-corner With Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml
Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml
Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml
 
Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml
Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml
Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml
Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml


Characteristic
 

1. Made of strong, medical grade polypropylene, autoclavable

2. Tri-corner design provides three dripless pouring spouts

3. Six different sizes meet different needs
 

Ordering Information
Cat #VolumeSterileUnit
93-005050mlNO25 Pieces/Sleeve, 4 Sleeves/Case
93-0100100mlNO25 Pieces/Sleeve, 4 Sleeves/Case
93-0250250mlNO25 Pieces/Sleeve, 4 Sleeves/Case
93-0400400mlNO25 Pieces/Sleeve, 4 Sleeves/Case
93-0800800mlNO25 Pieces/Sleeve, 4 Sleeves/Case
93-10001000mlNO25 Pieces/Sleeve, 4 Sleeves/Case

 

Disposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000mlDisposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000mlDisposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000mlDisposable PP Autoclavable Beakers Tri-Corner with Graduation Marks 50ml 100ml 250ml 400ml 800ml 1000ml1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 
 

You Might Also Like