Applied Materials
0.05mm, 0.08mm, 0.10mm, 0.23mm, 0.27mm and 0.30mm high magnetic conductivity oriented silicon steel sheets imported from Japan are adopted.
Structural features
It can be made into multi air gap core block or multi air gap CD core
Applicable working frequency of iron core
0.05mm, 0.08mm and 0.10mm ultra-thin silicon steel core is suitable for 1 Khz-10 kHz power supply; 0.20 mm, 0.23 mm, 0.27 mm
0.30mm high magnetic density iron core is suitable for 50 hz-60 Hz power supply.
Performance characteristics
It has high inductance, high flux density, low iron loss and low noise. Because its saturated flux density BS is as high as 1.9tesla, which is much higher than that of amorphous material bs1.56tesla,
The magnetostrictive coefficient is only one tenth of that of amorphous materials. Among them, 0.05mm and 0.08mm ultra-thin silicon steel are used in the frequency band of about 10kHz, which is comprehensive
The energy effect is better than that of amorphous materials

Technical parameters:
Voltage: 6kV, 10kV class;
Voltage regulation: off circuit tap regulation;
Tapping range: ±5%, ±2X2.5%;
Capacity range: 30-2500kVA;
Frequency: 50Hz, 60Hz;
Phase: single phase and 3-phase;
Vector group: Yyn0 or Dyn11
Impedance voltage: in line with national standard or according to customer's requirements;
Operation environment: max. temperature for outdoor operation
environment ≤ 40°C (or according to customer requirements);
Cooling method: oil immersed ONAN;

Work shop



Our Performance: 


Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!