Water Inmersion Retort /Sterilizer/Autoclave From China for Plastic Jsrs

Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs, Find details about China Food Processor, Trolley from Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs

Model NO.
DTSJ
Warranty
1 Year
Medium
Steam, Water, Air
Auxiliary
Boiler, Cooling Tower, Air Compressor
Trademark
DTS
Origin
China
HS Code
8419899090
Model NO.
DTSJ
Warranty
1 Year
Medium
Steam, Water, Air
Auxiliary
Boiler, Cooling Tower, Air Compressor
Trademark
DTS
Origin
China
HS Code
8419899090

Product Description

Water immersion retort uses the unique liquid flow switching technology to improve the uniformity of temperature inside the retort vessel. Hot water is prepared in advance in the hot water tank to start the sterilization process at high temperature and achieve the fast temperature rising, after sterilization, hot water is recycled and pumped back to hot water tank to achieve the purpose of energy saving.

Certifications

Retort is designed and produced according to the requirements of GB150-2011 <steel pressure vessel manufacturing standard>. DTS is identified and has passed through ISO9001, ISO14001 system authentication and also passed America ASME as well as SGS, TUV, BV, EAC rated.
DTS is the only retort supplier in China who gets ASME rated.

 
Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs

Detailed Photos

Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs
Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs
Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs

Our Advantages

1. Uniform water flow distribution
By switching the water flow direction in the retort vessel, uniform water flow is achieved at any position in the vertical and horizontal directions. An ideal system for dispersing water to the center of each product tray to achieve uniform sterilization without dead ends.

2. High temperature short time treament
High temperature short time sterilization can be performed by heating hot water in a hot water tank in advance and heating from high temperature to sterilize.

3. suitable for easily deformed containers

Because water has buoyancy, it can form a very good protective effect on the container under high temperature state.

4. Suitable for handing large packaging canned food
It is difficult to heat and sterilize the central part of large canned food in a short time by using a stationary retort, especially for food with high viscosity.
By rotating, the high viscosity food can be evenly heated to the center in a short time, and achieve effective sterilization effect. The buoyancy of the water at high temperature also plays a role in protecting the product packaging during the rotating process.

Product Parameters

ModelEffective diameterEffective
length
DimensionQty of food basketsDesign TemperatureDesign Pressure
LWH
DTSJ/10-2100018003500180028002147ÂșC3.5bar
DTSJ/10-3100024004091178530643
DTSJ/12-3120024003149185221773
DTSJ/12-4120036005462285139874
DTSJ/12-5120045005408255033935
DTSJ/14-3140032005600250040003
DTSJ/14-4140040006951242141024
DTSJ/14-5140050007600260042005

DTS Technologies

1. Spiral-tube heat exchanger made of stainless steel

Inside tube material is stainless steel 316L, no need to replace the rubber gasket, no need maintenance, corrosion resistance, long service life.
Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs

2.Full automatic linear control system

Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs
DTS self-studied patented technology D-TOP system can be sensitive to temperature.It can automatically calculate the pressure changes inside the container according to the temperature.And then automatically adjust the pressure inside the retort to get the pressure balance between container internal and external.So it can prevent the package's deformation, keep the package shape.Especially be suitable for aluminum tray products.Pressure was controlled in + / - 0.05 bar with compressed air intake valve and exhaust valve.

3. maintence cycle and alarm:For main valves, we set the maintenance cycle and time in the PLC, when it arrives, there will be alarm appear to notice.

Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs

Packaging & Shipping

Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs

Company Profile

MANUFACTURER OF RETORTS FOR STERILIZATION OF CANNED FOODS AND BEVERAGES

DTS is a company exclusively dedicated to manufacturing retorts for canned foods since its foundation in 2010 and has become a technology leader and supplier of first-class high-tech autoclaves or retorts for sterilization of food and beverage products after hermetically sealed in cans, jars, pouches, carton bricks or any type of suitable or "retortable" container.  In addition to the batch retorts, DTS also lauched a continuous vertical crateless retorts sterilizer with a revolutionary concept.

Water Inmersion Retort/Sterilizer/Autoclave From China for Plastic Jsrs