Products

Low Loss Dry Type Single Phase Iron Core DC Reactor

China Low Loss Dry Type Single Phase Iron Core DC Reactor, Find details about China Reactor, Dry Reactor from Low Loss Dry Type Single Phase Iron Core DC Reactor

Model NO.
Reactor DC
Usage
Automobile and Charging Pile
Frequency Characteristics
High Frequency
Shape of Core
Ring
Brand
Ville Industry
Dry
Iron Core Reactor
Frequency
50/60Hz
Trademark
ville
Transport Package
Wooden Cases
Specification
IEC Standard
Origin
China
HS Code
85
Model NO.
Reactor DC
Usage
Automobile and Charging Pile
Frequency Characteristics
High Frequency
Shape of Core
Ring
Brand
Ville Industry
Dry
Iron Core Reactor
Frequency
50/60Hz
Trademark
ville
Transport Package
Wooden Cases
Specification
IEC Standard
Origin
China
HS Code
85
Product introduction:
1.The reactor is single phase,all of the iron core dry type.
2.Low loss high quality imported cold rolled silicon steel core columns by multiple air gap is not In the running
process of change.
3.Coil using F or above the wire or foil winding.
4.Afer the reactor coil and the iron core are assembled into a whole,the reactor coil and the iron core are firmly
integrated into a whole,and the noise of the running time is greatly reduced.
5.The reactor core columns fasteners with unmagnetized material,operation to reduce and  Eddy current
heating phenomenon.
6.The reactor has the advantages of small size,light weight,beautiful appearance,etc.compared with the similar
products in China,can replace the well-known brands at home and abroad.

Use environment:
Not more than 2000meters above the sea level.Operating ambient temperature -25ºC~+45ºC,The relative
humidity is not more than 90%.No toxic gas around,no inflammable,and explosive Articles.Surrounding
environment should have good ventilation conditions,such as installed in the Cabinet,should be the installation
of ventilation equipment.

Product implementation standard:
IEC289;1987 reactor GB1022988 reactor eqvIEC289:1987 JB9644-1999 semiconductor electric drive
reactor,GB7328-1987 transformer and reactor level determination.

Product use:
Improvement of input current distortion caused by capacitor filter.
Reduce and prevent the damage cause by the shock current and the capacitor of the rectifier bridge.
Improve the power factor,reduce the DC bus AC pulse.
Limiting transient of grid voltage.
Together with parallel connected capacitors to suppress or filter out the ripple in the DC,to eliminated
the adverse effects of the load.

Technical parameters:
Rated operating voltage220V-1200V
Operating frequency50/60Hz
Rated operating current3A-2000A
The dielectric strengthCore winding
 3000VAC/50HZ/5MA/10S
 No arcing breakdown
Insulation resistance1000VDC
The insulation resistance is greater than or equal to100M.≥Ω
Maximun current1.5*rated current,continuous 60s
Reactor noiseLess than 65Db(1meter from the reactor level point of the test
Temperature rise95K
Protection levelIP00
Insulation classF level or above

Our sales team:
Low Loss Dry Type Single Phase Iron Core DC Reactor

Our advantages:

Quality Assurance

--From the very beginning, VILLE ensures quality in every step to achieve the best quality.

 Experience Sharing

--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.

 Global Service

--Wherever you are, VILLE global network will support and provide you with value.

 Quick Response

--In response to your needs without delay, VILLE  knows the value of your time.

Thanks for choosing VILLE as your reliable partner and please trust both
of us will create a brilliant future!

You Might Also Like