Aseptic Beverage Filling Machine

Newamstar has the exclusive matured medium and high speed PET aseptic cold filling technology in China. This technology could be applied widely. For both high acid and low acid product, the whole system could ensure the sterilization efficiency to 5D or 6D. Wet sterilization adopts PAA which is used for sterilization of the bottle and cap after being heated. The aseptic zone is realized through isolator. The machine's inside classification clean room is kept through positive pressure.

Technical features:

1, Multi rounds sanitizer spraying and cleaning technology to assure the safety of technics.

2, Mechanical type or electronic pulse type nozzle is of stable performance and water saving.

3, Non-contact filling head avoids cross contamination and ensures the safety of microorganism.

4, Betatron flowmeter gives the exact constant volume.

5, The capping machine is of aseptic type, self lubrication ceramics bearing, equipped with servo-motor.

6, The cap sterilizer is of soaking type or liner spraying type.

7, Automatic inspection, control and parameter record system. All the key points of the production line have been taken aseptic monitoring.

Aseptic Juice Filling Machine
Combiblock Application:
It is applied for PET Bottled drinking water, CSD, Juice, TEA, liquid milk, liquid condiment and household&personal care products. 
Capacity: 12000BPH-80000BPH

Newamstar High-speed Blowing-filing-capping Combiblock combines the blowing, filing and capping system reducing transmission, empty bottle handling, storage processes, which improved packaging hygienic condition and reduce packaging cross-contamination so as to improve the overall operating efficiency but lower the energy consumption, thereby reduce the overall production cost of enterprises. 


Advantages

Blowing unit

High-speed blow valve group with high-speed network control ensures blowing technic precision and unification. 
Three-dimensional dynamic simulating design ensures exact and reliable cam transmission and mesh. 
High-pressure blow valve group optimum design helps save air a lot. 
Quick-change for mould. 
Wearable aluminum alloy mould surface with special treatment of hardness. 
Key points automatic lubrication. 
Filling unit

High-speed and high-precision filling valve: 200ml/s, ± 3mm. 
Servo drive system
With CIP function
Capping unit

Magnetic constant torque, defective rate≤ 0.2%
Reversal caps ejecting device
No bottle, no feeding cap.
If you need more detailed information,please don't hesitate to contact us through the following connection method:
 
 
 
 
Web: newamstar.en.made-in-china.com