Products

The Samples with Powder Coating

China The Samples with Powder Coating, Find details about China Hlm, Powder Coating from The Samples with Powder Coating

Substrate
Aluminum
Components
Resin
Formation Mechanism
Conversion Type
Cured Condition
200ºC/20mins
Trademark
HLM
Transport Package
Carton Box
Specification
40*30*40
Origin
China
Substrate
Aluminum
Components
Resin
Formation Mechanism
Conversion Type
Cured Condition
200ºC/20mins
Trademark
HLM
Transport Package
Carton Box
Specification
40*30*40
Origin
China
The Samples with Powder Coating
The Samples with Powder Coating


 


                                                    Technical data sheet 
Physical properties
ColorRAL,PANTONGlosshigh/semi/matt
Surfacesmooth/sand/wrinkleSpecific gravity1-11.8
particle size10-30umSpray methodelectostatic spray gun
Curing temperature180ºC/20mins  
Chemical properties 
ItemStandardsPropertiesResults
Pencil hardnessASTM D-336≥ 2HPASS
Impact resistanceASTM D-2794≥ 120in.ibPASS
Adhesive forceASTM D-3359100%(5B)pasPASS
Flexing enduranceASTM D-5221/8'inch(3mm)PASS
Salt spray resistanceASTM B-117240 hoursPASS
UV resistanceASTM G-154500 hoursΔE≤6
Remark(Important)1. The above test use cold-rolled steel (thickness: 0.8mm) to remove rust and oil. Suggested film thickness: 60-80 um
2. The overall quality of the coating systerm is largely dependent on the type and quality of the pre-treatment.
3. The product must be stored in ventilated,dry and clen room with temperature below 25ºC,keep it away from fire and direct sunlight. The period of validity is 6 month.
4. There are no hazardous ingredients contained.Wearing anti-dust mask and goggles to avoid inhalation of dust.Try best to avoid longtime contact with powder.The coating adhesion to the skin can be washed with soap.
 
The Samples with Powder Coating
The Samples with Powder Coating
The Samples with Powder Coating

 

The Samples with Powder Coating



 

You Might Also Like