liquid silicone rubber mold for artificial stone molds rubber

Feature of  silicone rubber mold for artificial stone molds  :

1,low shrinkage and food grade

2,high tearstrength and translucent

3,long shelf life and demould with a lots times

4,high temperature resistance

5,high elongation

Application of  silicone rubber mold for artificial stone molds  :

The E-642 is addition cure silicone rubber, it is also named platinum silicone rubber , it is food grade. This kind silicone rubber is suitable for concrete stone mold , resin mold ,jewel mold,veneer stone mold , architectural stone mold ,cake mold , chocolate mold ,candy mold ,candle and soap mold , tyre mold , and it can be used for some other special application , such as seal ring ,vacuum mold etc.

Datasheet:

Operation instruction  :

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

More information , pls feel free to contact Ms Lisa:
 Mob :+8618938867508