High Quality Silicone for Plastic Crafts Casting liquid silicone rubber

Application of liquid silicone rubber for PVC plastic manual mold

Liquid silicone rubber for PVC plastic manual mold is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.

 

Description of liquid silicone rubber for PVC plastic manual mold:

Liquid silicone rubber for PVC plastic manual mold is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component A is silicone rubber, and component B is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% curing agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 618 manual mold silicon is mainly applicable to manual molds and small number of product duplication.

Operation Instruction of  liquid Silicone rubber for PVC plastic manual mold:

1. The silicone rubber for manual mold is applied to small products or products with fine patterns. The mold  for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.

 

2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.

 

Datasheet:

Operation instruction  :

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at: