Products

Optic Cable Joints Protective Closure

China Optic Cable Joints Protective Closure, Find details about China Fiber Optic Splice Closure, Fiber Joints Enclosure from Optic Cable Joints Protective Closure

Model NO.
GJS03-M1AX-144
Max. Tray Number
6 PCS of Trays
Tray Capacity
24f
Splice Position
in The Middle of Tray
Cable Construction
Loose Central Core, Loose Fiber Tube
IP Grade
68
Transport Package
Ctns
Origin
Chengdu, China
HS Code
853600000
Model NO.
GJS03-M1AX-144
Max. Tray Number
6 PCS of Trays
Tray Capacity
24f
Splice Position
in The Middle of Tray
Cable Construction
Loose Central Core, Loose Fiber Tube
IP Grade
68
Transport Package
Ctns
Origin
Chengdu, China
HS Code
853600000
Fiber optic Splice closure 

Optic Cable Joints Protective Closure



 
 
GJS03-M1AX-144
The strong housing provide fire resistant, anti-aging,waterproof,anti-UV and quakeproof while protecting splices during pulling, torsining and impacting.Used to directly connect or splice optic cable fibers, in aerial, underground, direct buried, wall-mounting , hand hole and duct mounting application. Mounted on a pole, wall or a strand.
 
ModelTrays  Tray capacityTotal Capacity
(fibers)		Dimension
(max point)		Entry Port dia. Raw material
GJS 03-M1AX-144624c144 c422.3*219.2 mm1 oval port for 2pcs 10-29mm cable.
4 round ports for 6-24 mm cable		Dome & base : Modified P.P
Clamp: Nylon +GF
Tray: ABS
 
Application :
It can be installed in aerial locations, ducted applications, direct buried, manholes. Small volume but large capacity.
 
Features:
1. If less than 144c splice, the excessive fibers can be stored in storage baskets. Easy in fiber management.
2. Fabricated by mixing the imported material and other chemical assistant agent (ageing resistance & ultraviolet radiation resistance), increase of service life
3. Base-to-dome seals on FOSC are mechanical and heat-shrinkable for ease of installation and reentry. No other sealing adhesive tape is needed
4. The splice trays are hinged for access to any splice without disturbing others trays
5. The inner parts and fixing parts are made of 304 stainless steel
6. FOSC with a earthing device protect it from damage by lightning

Technical Parameter:
1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade
2. Atmospheric Pressure: 70~150Kpa
3. Axial Tension: >2000N/1min
4. Stretching Resistance: 2500N/10 square centimetre(1min)
5. Insulation resistance: >2*104MΩ
6. Voltage Strength: 15KV/1min, no arcover or breakdown
7. Pressure in the water: 50m/72hours
8. Splice tray with optical taking-in radius≥ 40mm. Low optical loss.

Relating Producing Lines:



Optic Cable Joints Protective Closure
Optic Cable Joints Protective Closure



 

You Might Also Like