Products

Complex Mold Imitation Wood Rigid PU Foam

China Complex Mold Imitation Wood Rigid PU Foam, Find details about China "Blend Polyol, Imitation Wood from Complex Mold Imitation Wood Rigid PU Foam

Rise Time
6-15 S
Core Density
10kg/M3
Compressive Strength
500~1200 Cps
Application
Traffic Industry
Trademark
shunda
Transport Package
220kg/Drum
Specification
Two components
Origin
China
HS Code
39072090
Rise Time
6-15 S
Core Density
10kg/M3
Compressive Strength
500~1200 Cps
Application
Traffic Industry
Trademark
shunda
Transport Package
220kg/Drum
Specification
Two components
Origin
China
HS Code
39072090
Blend Polyol SD2702
Imitation Wood Rigid PU foam
DESCRIPTION
SD2702 is suitable for the usage of high density rigid PU foam, which can be used for the field of imitation wood, blocks and so on. It used together with isocyanate(PM-200) to make rigid PU foam through PU injection machine or handwork.The foam produced has the characteristics as following:
  1. Low quantity, high strength of the products
  2. It is suitable for the complex mold.
TYPICAL PHYSICAL PROPERTIES
Physical ProperitiesTest MethodMetricValue
Core DensityGB/T 6343-2009kg/m370-600
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
PACKING SPECIFICATION
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS  
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature is 15~25ºC.

PACKING SPECIFICATION
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature is 15~25ºC.
SAFTY PRECAUTIONS
Direct contact with SD2702 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

                                                                                       
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.



Complex Mold Imitation Wood Rigid PU Foam
Complex Mold Imitation Wood Rigid PU Foam
Complex Mold Imitation Wood Rigid PU Foam

Complex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU FoamComplex Mold Imitation Wood Rigid PU Foam

You Might Also Like