Products

Wall Insulation Fireproof Panel Raw Material Mdi and Blend Polyol
Wall Insulation Fireproof Panel Raw Material Mdi and Blend Polyol

Wall Insulation Fireproof Panel Raw Material Mdi and Blend Polyol

China Wall Insulation Fireproof Panel Raw Material Mdi and Blend Polyol, Find details about China Polyol, Blend Polyol from Wall Insulation Fireproof Panel Raw Material Mdi and Blend Polyol

Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
Core Density
40
Appearance
Liquid
Viscosity
300
Shelf Life
6 Months
Water Absorption
3
Trademark
Shunda
Transport Package
Drum
Specification
220kg/drum
Origin
China
HS Code
3907209000
BLEND POLYOL SD3232
GENERAL FLAME RETARDANT FOAM FOR CONTINUOUS SANDWICH PANEL
PRODUCT INTRODUCTION
SD3232 is a kind of blend polyol used for the continuous line, color steel sandwich panel general flame retardant rigid PU foam. It is widely used for the production of cold storage sandwich panel, building roof panel, factory out wall panel, door panel and so on. When it combined with isocyanate leads to the formation of rigid polyurethane foam of color steel sandwich panel by using PU foaming machine and laminating plant. The foam formed has the characteristics as following:
  1. Low ODP.
  2. It has a good bonding effect with the steel.
  3. The low thermal conductivity, low water absorption and good dimensional stability.
  4. Long service life.
  5. TYPICAL PHYSICAL PROPERTIES
Physical ProperitiesTest MethodMetricValue
Finished Products Foam DensityGBT 6343-2009kg/M330-50
Compression StrengthGBT 8813-2008MPa0.12-0.20
Tensile StrengthGB 9641-1988MPa0.06-0.20
Thermal ConductivityGBT 10294-2008W/(m·K)0.018-0.024
Oxygen IndexGBT 2406.2-2009%23.0±1
Dimensional StabilityGBT 8811-2008%0-2.0
Closed Cell RateGBT 10799-2008%90±5
Water AbsorptionGBT 8810-2005%≤3
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions .For our products, the data are not legally binding.


PACKING SPECIFICATION
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)

STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature is 15~25ºC.

SAFETY PRECAUTIONS:
Direct contact with SD2702 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

                                                                                      
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.

 

You Might Also Like