OEM Slurry Pump Bearing Assembly E005m

China OEM Slurry Pump Bearing Assembly E005m, Find details about China Bearing Barrels C005m, Bearing Assembly D005m from OEM Slurry Pump Bearing Assembly E005m

Model NO.
E005M
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Anti-Corrosion
Wear Resistant
Trademark
Naipu or OEM
Transport Package
Wooden Case
Specification
TH005M
Origin
China
HS Code
8413701090
Model NO.
E005M
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Anti-Corrosion
Wear Resistant
Trademark
Naipu or OEM
Transport Package
Wooden Case
Specification
TH005M
Origin
China
HS Code
8413701090
OEM Slurry pump bearing assembly E005M

E005M Part Components:
 
DescriptionPart NameQuantity Part No.
E005MBearing, drive end16580-6535 Timken
Bearing, wet end16580-6535 Timken
Seals2E089-10S10
Labyrinth seal kit2E062-10E62
Shim set1E025P10
Piston Ring4E108G02
Shaft Key1E070ME05
Shaft1E073ME03
Bearing Housing1E004MD21
End cover2E024-10E62
Grease retainers2E046E62
Labyrinth lock nut1E061E62


It is advisable to preheat bearing inner ring or cones(never exceed 120ºC),with shaft in vertical position heated inner ring or cones can be slipped on and pressed or tapped up to shoulder or grease retainer.For the double rows of tapper roller bearings,its inner ring or corners,cup and spacer may be not interchangeable with similar assmblies of the same type bearings.

OEM Slurry Pump Bearing Assembly E005m
For Type-R,S,ST,T,TU,V Bearing assembly,double rows taper roller bearings are fitted on the pump end.The axial gap may be not required to adjust because the end pay may be guaranteed by themselves.Apply oil or light grease to bearing lands.The seal in the end cover of bearing is used of labyrinth and piston ring.Fit rings to the groove of labyrinths.Position piston ring gaps diametrically opposite. It is recommended that lubricating grease used in roller bearing should be No.2 or 3,SY1412-75 Lithium-Based Grease.
The recommended initial quantity of grease to be used for each bearing is as following table during assembly.
Frame/GramsBCDEFR.RSS.STT.TU
Drive End30501002005002005001150
Wet End305010020050040010002300


Product Overview:

OEM Slurry Pump Bearing Assembly E005m
OEM Slurry Pump Bearing Assembly E005m




Other Related Pump Parts:

OEM Slurry Pump Bearing Assembly E005m
OEM Slurry Pump Bearing Assembly E005m


 

Naipu Workshop:

NAIPU PUMP is a whole processing company, Start from Modeling Workshop,Casting Workshop,Heat treatment Workshop,Machining Workshop ,Assembly Workshop and Pump Testing Workshop are all by us. So we are modernization and integrated company to satisfy the requirement of the changing needs of market.

As a professional pump manufacturer,we always stick to the principle of technology and quality comes first. At NAIPU PUMP, we strictly adhere to the ISO9001 Standard and CE Certificate and other industry standards as requests.

We set various check points along the whole production line,which throughout Raw Material,Charging Material,Surface and Heat Treatment checking,Material Analysis,Spare Testing and Pump Testing etc.

We have established a strict QA and QC system,we can provide quality control records such as "Spectrum Detection" "Metallographic Microscope Inspection" "Block Test"  "Ultrasonic Flaw Detection" " Penetration Testing"etc. And related test reports to our clients if necessary, such as " Material Test Report "  " Dimensional Test Report "  " Rotor Balancing Test Report "  " NDT Test Report "  " Hardness Inspection Report " etc.

OEM Slurry Pump Bearing Assembly E005m






Certificate:

OEM Slurry Pump Bearing Assembly E005m



Contact US:


Shijiazhuang NaiPu Pump Co.,Ltd


Contact Person: Karen Tan