EXPERTS IN POULTRY & LIVESTOCK FARM LIGHTING SYATEM
Shenzhen Hontech-Wins Electronics Co.,Ltd.Product Description
T6 IP67 Dimmable DC48V 1800mm LED tube light
LED Poultry Light For Cage Chickens T6 (OD20mm)
HT Product Code | Beam Angle | Voltage | Power | LED info | Total Length |
HT-T6DC04W12FB | 180 degree | 48Vdc | 4W | SMD2835 45leds | 1200mm |
HT-T6DC05W15FB | 5W | SMD2835 60leds | 1500mm |
HT-T6DC06W18FB | 6W | SMD2835 75leds | 1800mm |
Application
Notice
1) This unit MUST be installed and wired by a qualified electrical contractor.
2) Please cut the power off when install and remove the products to avoid risk of electric shock
3) Ensure that the fixed plate should be firmly afforded 2kg.
4) Each LED tube should be not less than 2pcs screw or bolt.
5) Fixture control gear/AC cable MUST BE MOUNTED ABOVE any insulation covering and waterproof box.
6) Do not look directly at LED light source for a long time.
Type | Model | Each Carton | G.W | Size | |
Double end with 0.35m cable | HT-T6DC06W18FB | 50PCS | 25.6KG/CTN | 191*31*31cm | |
FAQ
Q1. Where is your Manufacturer/factory located?
A: Our factory/manufacturer located in Shenzhen,china, Which is focus on the made in china high quality led tube light .we are the specilizer for "livestock farm lighting system, Chicken/Pig farm LED tube, LED bulb, Dimmer controller."Q2. Which size/materials of integrated dimmable led tube IP67 are hontech-wins used. Why call it dimmable waterproof tube light?A:- We use full PC pipe to avoid lightning stroke.
- Multilayer protections by coating isolation oil (LED chips fully coated, drivers fully coated, and soldering pad fully coated)
- Driver with PC tube to protect!
- Adjustable: led spotlight housing ring can rotatableled( rotating spotlight rotary led spotlights)
- Heat Sink: 6063 Aluminum excellent quality in tube light, Good for tube T12 led light heat sink.
- TPU+Chemical cap to seal the PC tube with strong spring holding functions.
- Unique design by "Screw Thread" for the TPU cap to avoid any possibility for water goes inside the tube.
- Wire lead is UL standard and 2*1.0mm² for wire
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4.Which cable connect DC are Hontech-Wins used.A: - Wire lead is UL standard and 2*1.5mm² for wire.
- Special material it can working in -25degree refrigerator
Q5. How to proceed an order for 180cm led T6 tube light?A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on LED T6 dimmable product?A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the LED T6 tube with CE SASO SAA certificates ?A: Yes, we offer 3-5 years warranty to our products.
Q8:How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.