Products

Surgical Products Surgical Instruments for Small Locking Plate Instrument Set

China Surgical Products Surgical Instruments for Small Locking Plate Instrument Set, Find details about China Surgical Instruments, Small Locking Fragment Plate from Surgical Products Surgical Instruments for Small Locking Plate Instrument Set

Model NO.
CANSLP
Color
Customized
Certificate
ISO13485, ISO9001, Ce
Logo
Canwell / OEM
Model No
Canslp
Trademark
Canwell/Customized
Transport Package
Cartoon
Specification
Customized
Origin
Zhejiang
HS Code
9021100000
Model NO.
CANSLP
Color
Customized
Certificate
ISO13485, ISO9001, Ce
Logo
Canwell / OEM
Model No
Canslp
Trademark
Canwell/Customized
Transport Package
Cartoon
Specification
Customized
Origin
Zhejiang
HS Code
9021100000
Surgical Products Surgical Instruments for Small Locking Plate Instrument Set
Characteristics of The Products
The locking screw concept was produced by Dr. Tepic S and Dr. Perren SM for the first time in 1995. With locking compression plate put in use, it became one of the most important developments for plate and screw internal fixation in recent years. Locking screws provide the ability to create a fixed-angle construct while utilizing familiar conventional plating techniques. The fixed-angle construct function like a internal fixators which maintain primary and secondary loss of reduction. This kind construct also provides improved fixation in osteopenic bone or multifragment fractures where traditional screw purchase is compromised. LCP constructs do not relγ on plate-to-bone compression to maintain stability. Therefore, the periosteum will be protected and the blood supply to the bone preserved.    
Surgical Products Surgical Instruments for Small Locking Plate Instrument Set
Surgical Products Surgical Instruments for Small Locking Plate Instrument Set
 
P.NDescriptionQty.
112100001Depth Gauge for φ2.5mm-φ4. 0mm Length 60mm1
112100002Plate Bender, left Length 190mm1
112100003Plate Bender, right Length 190mm1
112100004LC-DCP Drill Guide, Ø2.5/Ø3.5mm1
112100005Double Drill Sleeve I, Ø2.5/Ø3.5mm1
112100008Bending Template, large Length 118mm Width 10mm1
112100009Bending Template, small Length 92mm Width 10mm1
112100014Countersink Length 100mm1
112100015Drill Bit, Ø3.5mm Length 112mm Thread Length 60mm1
112100016Drill Bit, Ø2.5mm Length 112mm Thread Length 30mm2
112100017Hexagonal Screwdriver Shaft1
112100018Tap for Cortex Screw φ3.5mm Length 112mm Thread Length 30mm1
112100019Tap for Cancellous Bone Screw φ4.0mm Thread Length 20mm1
112100020Universal Drill Guide II, Ø3.5/2.5mm1
112100022Hexagonal Screwdriver with Holding Sleeve, Length 200mm1
112100024T-handle with Quick Coupling Length 90mm1
112200001Torque Limiter 1.5N Length 220mm1
112200002φ2.8Threaded Drill Sleeve for φ3.5mm2
112200003Stardrive Screwdriver Shaft, Length 120mm1
112200004φ2.8Drill Bit Length 165mm Thread Length 40mm2
112200005Easyout Length 80mm1
112200009Screw Driver Length 200mm1
112200010Bender for K-Wire1
112127000Screw Tray1
112128000Instrument Tray1
Surgical Products Surgical Instruments for Small Locking Plate Instrument Set
Surgical Products Surgical Instruments for Small Locking Plate Instrument Set
Surgical Products Surgical Instruments for Small Locking Plate Instrument SetSurgical Products Surgical Instruments for Small Locking Plate Instrument Set

Q: Would you please give some information on shipping mode and charges? 
A: Normally we send through courier, or post upon request from clients.

Q: Do you have ISO 9001, CE, or FDA approvals? 

 A: Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have FDA Registrations and CE mark for many of our products.

Q: What is the minimum order that we can place? 
A: We expect your minimum orders to be least at US$1000. However, we understand that   customers need to place smaller samples orders in the beginning in order to test market our products . Samples against cost are available on request.

Q: Can I buy products not shown but similar to your catalogue?
A: Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.

Q: Do you have stock for listed products, or they are newly produced?
A: Generally, we have stock for every listed products, which were produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.

You Might Also Like