PTH10 Smart Temperature and Humidity Socket is specially designed for smart home, can be used to control various household appliances. Because of its temperature & humidity sensor,especially suitable for traditional oil heaters or humidifiers, which can make them be smart in seconds.
 

Rated voltage: 250V
Maximum power: 2500W
Humidity sensor range: 20~90%
Humidity accuracy: +/-5%
Temperature sensor range: 0~60 degrees Celsius
Temperature accuracy: +/-0.3 degrees Celsius
Sensor battery model: CR2450
Battery life: more than one year
Socket size: 52mm×63mm×31mm
Sensor size: 41mm×41mm×14mm
Operating system: Android 5 or IOS9.0 above
 

1. Long press the network button at the bottom of the socket, and enter the network distribution mode when the top LED light flashes.

2. Click "+" in the APP and find the smart socket and click Add.

3. Follow the APP prompts until the addition is successful.

4. Replace the Temperature & Humidity sensor batter

 If the sensor is not fixed with double-sided tape: Use a one-yuan coin to align the slot and rotate it in the direction of the arrow to open the battery cover. After installing the battery, align the lower cover with the upper cover and rotate it in the opposite direction to complete the replacement.


If the sensor is fixed with double-sided tape: hold the upper cover and unscrew the sensor housing in the direction of the arrow to replace the battery. After the battery is installed, please align the upper cover with the battery cover card position and tightened to complete the replacement.