Products

1100 /3105/3003 Aluminum Roll Jacketing Coil

China 1100/3105/3003 Aluminum Roll Jacketing Coil, Find details about China 1100/3105/3003 Aluminum Roll Jacketing Coil, 1100/3105/3003 Aluminum Roll Jacketing Strip from 1100/3105/3003 Aluminum Roll Jacketing Coil

Model NO.
1100/3105/3003
Alloy
Alloy
Thickness
0.3-2mm
Width
1000mm-1500mm
Trademark
Chalco Aluminum
Transport Package
Export Standard Wooden Pallet
Specification
According to Customer Requirement
Origin
Henan China
HS Code
7606119000
Model NO.
1100/3105/3003
Alloy
Alloy
Thickness
0.3-2mm
Width
1000mm-1500mm
Trademark
Chalco Aluminum
Transport Package
Export Standard Wooden Pallet
Specification
According to Customer Requirement
Origin
Henan China
HS Code
7606119000
1100 3105 3003 Aluminum Roll Jacketing Coil
 
Aluminum Roll Jacketing is the premier protective outer surface covering for mechanical insulation systems including pipe, vessels, and equipment.  It protects the insulation and underlying pipe/vessel from physical damage, UV exposure, corrosive atmospheres, and water.

Aluminum Roll Jacketing is manufactured from alloys 3105 and 3003, conforming to ASTM B-209 designation, half-hard temper (H-14) and heavier gauges-hard (H-12 lock-forming quality). Commercially pure aluminum is relatively soft as structural material. Its strength can be greatly improved by alloying aluminum with small percentages of one or more other elements such as manganese, silicon, copper, magnesium, or zinc. Additional strength can be achieved by cold working, such as cold rolling.
 
1100 3105 3003  Aluminum Roll Jacketing has a bare outer surface and comes standard with a 3 mil thick polyfilm moisture barrier. This barrier is heat-laminated to the interior surface to help prevent corrosion of the jacketing and the underlying metal pipe, vessel, or equipment.
 
1100 3105 3003 Aluminum Roll Jacketing Product options:
Technical Features of Alumnum Insulation Roll Coil
WIDTH:         1000 mm-1500 mm
THICKNESS:        0,3- 2 mm.
INTERNAL DIAMETER:  305mm, 405mm, 505mm, with paper core or without core.
OUTSIDE DIAMETER (øext) According to coil weight and finish
Most common coils    125 - 150 - 250 - 300 - 500 - 1000 - 2000 - 3000 - 4000 meters
FINISH             Mill finish, Stucco
AVAILABLE ALLOYS 1100, 3003, 3105

1100 3105 3003 Aluminum Roll Jacketing Thickness Information:

- 0.4mm: Considered the standard for industrial use and recommended on pipelines up to 24" O.D., which includes the insulation. Primarily used to protect piping, vessels, and tanks that are less than 8 feet in diameter.
 
- 0.5mm: Applicable for insulation lines up to 36" O.D., including insulation. Primary use to protect towers, vessels, and tanks with a diameter greater than 8 feet.
 
- 0.6mm: Heavier gauge roll jacketing where extra strength and protection is required.
 
- 0.8mm: For areas where extra protection is required, or in custom fabrication of Box covers, tank heads, or heavy wear areas.
 
Chalco Aluminum Insulation Jacketing is manufactured from alloys 3105 and 3003, conforming to ASTM B-209 standards. Aluminum jacketing is suitable for most general industrial applications. It will keep your insulation dry and functional. Aluminum jacketing has a Moisture Retarder. The retarder prevents galvanic or chemical corrosion at the metal-insulation interface.
 
Aluminum jacketing is recommended for insulated piping, tanks and vessels.
Chalco's Aluminum jacketing is available with a smooth, stucco embossed, or corrugated finish. 

Aluminum Jacketing is recommended for use in all of the following insulation system applications: • Standard outdoor use on all pipe, vertical tank insulation systems up to 8 ft outer diameter, and all horizontal tanks
• Indoor insulation system applications up to 8 ft outer diameter where increased damage resistance is desired

 
 
 

 

You Might Also Like