QDR-1000 Dust Resistance Test Chamber used to do dustproof and dust resistance experiment for various automobile parts.
The main test parts include lights, instrumentation, safety belt, seat regulator, electric dust cover, steering gear shaft and locks, to test its dust resistance and movement safety.
Flow dust testing in accordance with IEC60529 and MIL/STD810D.
QDR-1000 Product Features:
1, Uniformly synchronization hammer vibration dust emission device
2, Auto adjust dust concentration 100mg/m3-60000mg/ m3
3, Interior chamber temperature and humidity control system
4, Electrostatic eliminating device can avoid the dust on the chamber wall
5, Automatic dust dehumidification system, to reduce the water content of dust and make sure dust in stable quality
6, Available to supply EIA, JIS industrial dust, Arizona ash, butenandt cement, talc, Kanto sand dozens of respirable dust and not respirable dust
7, Disposable dust belt, ensuring the safety of operator
8, Automatic dust recovery device, reduce into chamber cleaning
Executive Standards
GB4208-2008
GB2423.37-2006
GB/T4942.1-2006
GB/T4942.2
GB10485-2006
| Model | QDR-1000 |
| Test Type | F1 | F2 | F3 | C |
| Interior dimensions | 100*100*100cm (W*D*H) |
| Exterior dimensions | 150*120*188cm (W*D*H) |
| Test Temp. | 25~40deg (natural temperature without control) |
| Test Humid. | 45~85%RH(natural temperature without control) |
| Dust concentration | 60000mg/m3 | 3000 mg/m3 | 100 mg/m3 | 100~5000 mg/m3 |
| Dust spray period | 1sec~99hr |
| Air source | 3~5kg/cm3 |
| Power | AC 220V 60HZ /380V 50HZ |