Wood Grain Color Aluminium Extrusion Profile Supplier
China Wood Grain Color Aluminium Extrusion Profile Supplier, Find details about China Anodized Aluminium Frame, Powder Coating Aluminum from Wood Grain Color Aluminium Extrusion Profile Supplier
Basic Info.
Model NO.
Weiye110
Surface Finishing
Powder Spraying
Alloying Ingredient
6063
Certification
CE, SONCAP, ISO, TUV, Qualicoat
Polished Aluminum Profile
Chemical Polishing
Usage
Aluminium Door & Window Profile
Surface Treatment
Powder Coating
Length
Customer Required Length
Raw Material
6063/6061/6082/6351/7005/5052
Brand
Weiye
Delivery
10-15days
Payment Term
T/T L/C
Shipment
Fob/CIF
Sample
Color Samples
Trademark
WEIYE
Transport Package
Pearl Cotton, Shrink Film & Customized
Specification
Aluminum profile
Origin
China
HS Code
7604210000
Model NO.
Weiye110
Surface Finishing
Powder Spraying
Alloying Ingredient
6063
Certification
CE, SONCAP, ISO, TUV, Qualicoat
Polished Aluminum Profile
Chemical Polishing
Usage
Aluminium Door & Window Profile
Surface Treatment
Powder Coating
Length
Customer Required Length
Raw Material
6063/6061/6082/6351/7005/5052
Brand
Weiye
Delivery
10-15days
Payment Term
T/T L/C
Shipment
Fob/CIF
Sample
Color Samples
Trademark
WEIYE
Transport Package
Pearl Cotton, Shrink Film & Customized
Specification
Aluminum profile
Origin
China
HS Code
7604210000
Product Desciption
Aluminium Profile Surface Treatment
Aluminium Profile General Chiemical Composition of Alloy
Aluminium Profile Mechanical Properties of Sections Under Room Temperature
Company Introduction
Since 1992, Guangdong Weiye Aluminium Factory Group Co.,Ltd. was found in Foshan City, the first city of chinese aluminium extrusion profiles. The company totally takes up area of over 600000sqm,has employees more than 1600,including 83 engineers and technicians;
Weiye Possesses globally-advanced manufacturing equipments for aluminium profiles,which leads to production capacity more than 400,000 tons;
65 extrusion lines with the capacity 600 tons to 7000 tons;
15 environment-friendly casting rod lines;
8 lines of anodic oxidation and electropnoresis each;
9 powder coating lines with vertical lines;
3 fluorocarbon spraying lines;
18 heat-insulating lines;
5 wood-grain lines;
FAQ
Q1: What's the payment?
A: Usually by T/T, L/C, 30% as advanced deposit and balance before shipment;
Q2: How long the delivery time for the sample and mass producttion?
A1: 2 -3 weeks to open the new mould and make sample;
A2:3-4 weeks after receipt of deposit and confirmation of the order;
Q3: What's the package?
A: Usually inside pearl cotton, outside shrink film. also according to customized;
Q4: What's certificates do you have?
A: Qualicoat,Qualand,CNAS,ISO,AS2047
FAQ:
Q1: Are you manufacturer ?
A: Yes, sir. Weiye Aluminum Factory located on Foshan city, Guangdong Provice which has 25 years expercience in aluminum products ( aluminum extrucion ).
Q2: If I need sample, couldoor panel
d you support?
A: Yes, sir. You only need to provide the drawings to us. All the rest of the things Weiye Aluminum Factory do.
Q3: What's your MOQ ?
A: 1 metric ton for each model.
Q4: What's the thickness for anodizing? Can you do 15 um?
A: Yes, Weiye Aluminum Factory can do 15um and above.
Q5: What color you can do for powder coating? The thickness for powder coating?
A: Weiye Aluminum Factory can do any color for powder coating as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
Q6: How do you charge the mold fee?
A: Incase we need to open new mold for your ordered profiles ,the mold fee will be refounded to customers when your order quantity reaches a certain amount.
Q7. What is the differences between theoretical weight and actual weight?
A: Actual weight is the actual weight including packaging. Theoretical weight is identified according to the drawing,calculated by of the weight of each meter multiplied by the length of profile.
Q8. How do you quote price , per ton or per meter?
A: Weiye Aluminum Factory provide more than two pricing modes
Q9: How many years of your windows and doors product warranty ?
A: 10~20 years for different surface
Q11: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, Weiye Aluminum Factory can do according to the color samples you provide.
Q12: How's the weather resistance for wood grain finish D1010?
A: (1). Powder: Akzo Noble Interpon D1010.
(2). Wood grain film: Italian Menphis.
(3). Standard complied: American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather: 10 years color guarantee.
Q13: What certification do you have? What's your standard?
A: Weiye Aluminum Factory have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB. We got more certification from Norway and other counntries, we also passed the related certification of miltary industry.
Q14: What's the delivery time for samples and mass production?
A: (1). 1-2 weeks to open the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
Q15: How much the shipping cost is ?
A: The shipping cost changes every month. From China to Sydney/Melbone is about USD650 for 1 20ft container.
Q16: How do you pack your product?
A: Packing steps for aluminum windows:
Step 1.Protective tape protects frames from scratches;
Step 2.Keep windows fixed on iron pallets;
Step 3.Tie up windows on the iron pallets with plastic belts;
Step 4.PE films keep windows away from sea water;
Step 5.Fill in the space between each two iron pallets by air bags;
Step 6.Tie up iron pallets in container with plastic belts.
Our packages will ensure the windows arrive at project jobsite in good conditions.
Q17. Are you supplying standard sizes of windows/doors or customised products ?
A: Both are available. Weiye Aluminum Factory have our own designed windows/doors series, and we also supply customised products for lots of end customers,developers and builders.
Q18. Is there any price difference between powder coating and anodizing ?
A: Yes, there is little difference. Different surface finish will make little different cost difference.
Weiye Aluminum Factory recommend you to choose anodized finish if the house is near salt water for long-effective corrosion resistance,but powder coating will be better if the house is far away from salt water.
Q19. What kinds of hardware can you supply ?
A: Commonly Germany brand,China top brand and other customers appointed brands.Weiye Aluminum Factory recommend you to use the local brand. Because it will be easy for you to replace.
| Powder Coating Quality | ||
| Max Film Thickness (um) | Standard Film Thickness (um) | Min Film Thickness (um) |
| 120 | 60 | 40 |
Anodized Quality | ||
| Coating Film Thickness (um) | Min-Average Film Thickness (um) | Min-Part Film Thickness (um) |
| AA10 | 10 | 8 |
| AA15 | 15 | 12 |
| AA20 | 20 | 16 |
| AA25 | 25 | 20 |
| Electrophoresis Quality | ||
| Anodized Film Thickness (um) | Paint Film Thickness (um) | Composite Film Thickness (um) |
| ≥9 | ≥12 | ≥21 |
PVDF Quality | ||
| Coating Type | Average Film Thickness (um) | Min-Part Film Thickness (um) |
| Two Coating | ≥30 | ≥25 |
| Three Coating | ≥40 | ≥34 |
| Four Coating | ≥65 | ≥55 |
Wooden Grain Quality | ||
| Max-Part Film Thickness (um) | Average Film Thickness (um) | Min Part Film Thickness (um) |
| 100 | 80 | 60 |
Aluminium Profile General Chiemical Composition of Alloy
| Alloy | 6063 (%) | 6061(%) | 6082 (%) |
| Silicon Si | 0.2-0.6 | 0.40-0.80 | 0.7-1.3 |
| Iron Fe | 0.35 | 0.70 | 0.5 |
| Copper Cu | 0.10 | 0.15-0.40 | 0.1 |
| Manganese Mn | 0.10 | 0.15 | 0.4-1.0 |
| Magnesium Mg | 0.45-0.90 | 0.80-1.2 | 0.6-1.2 |
| Chromium Cr | 0.10 | 0.04-0.35 | 0.25 |
| Zine Zn | 0.10 | 0.25 | 0.20 |
| Titanium Ti | 0.10 | 0.15 | 0.10 |
| Others ( each) | 0.05 | 0.05 | 0.05 |
| Others (total) | 0.15 | 0.15 | 0.15 |
| Aluminium Al | Remainder | Remainder | Remainder |
Aluminium Profile Mechanical Properties of Sections Under Room Temperature
| Alloy | State | Width (mm) | Tensile Strength Test | Hardness Test | |||||
| Tensile Strength (rm) | Non-Proportional Stretching Stress (rp02) | Streching Rate | Pattern Thickness | Vicker Thickness | Vicker Thickness | ||||
| A | A50mm% | mm | HV | HW | |||||
| 6063 | T4 | ≤25 | 130 | 65 | - | 12 | 0.8 | 58 | 8 |
| T5 | all | 160 | 110 | 8 | 8 | - | - | - | |
| T6 | all | 205 | 180 | 8 | 8 | - | - | - | |
| 6061 | T4 | all | 180 | 110 | 16 | 16 | - | - | - |
| T6 | all | 265 | 245 | 8 | 8 | - | - | - | |
| 6082 | T4 | ≤25 | 205 | 110 | - | 12 | - | - | - |
| T6 | ≤5 | 290 | 250 | - | 6 | - | - | - | |
| ≥5-25 | 310 | 260 | - | 8 | - | - | - | ||
| 6351 | T4 | ≤25 | 205 | 110 | - | 12 | - | - | - |
| T6 | ≤5 | 290 | 250 | - | 6 | - | - | - | |
| ≥5-25 | 300 | 255 | - | 8 | - | - | - | ||
Company Introduction
Since 1992, Guangdong Weiye Aluminium Factory Group Co.,Ltd. was found in Foshan City, the first city of chinese aluminium extrusion profiles. The company totally takes up area of over 600000sqm,has employees more than 1600,including 83 engineers and technicians;
Weiye Possesses globally-advanced manufacturing equipments for aluminium profiles,which leads to production capacity more than 400,000 tons;
65 extrusion lines with the capacity 600 tons to 7000 tons;
15 environment-friendly casting rod lines;
8 lines of anodic oxidation and electropnoresis each;
9 powder coating lines with vertical lines;
3 fluorocarbon spraying lines;
18 heat-insulating lines;
5 wood-grain lines;
FAQ
Q1: What's the payment?
A: Usually by T/T, L/C, 30% as advanced deposit and balance before shipment;
Q2: How long the delivery time for the sample and mass producttion?
A1: 2 -3 weeks to open the new mould and make sample;
A2:3-4 weeks after receipt of deposit and confirmation of the order;
Q3: What's the package?
A: Usually inside pearl cotton, outside shrink film. also according to customized;
Q4: What's certificates do you have?
A: Qualicoat,Qualand,CNAS,ISO,AS2047
FAQ:
Q1: Are you manufacturer ?
A: Yes, sir. Weiye Aluminum Factory located on Foshan city, Guangdong Provice which has 25 years expercience in aluminum products ( aluminum extrucion ).
Q2: If I need sample, couldoor panel
d you support?
A: Yes, sir. You only need to provide the drawings to us. All the rest of the things Weiye Aluminum Factory do.
Q3: What's your MOQ ?
A: 1 metric ton for each model.
Q4: What's the thickness for anodizing? Can you do 15 um?
A: Yes, Weiye Aluminum Factory can do 15um and above.
Q5: What color you can do for powder coating? The thickness for powder coating?
A: Weiye Aluminum Factory can do any color for powder coating as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
Q6: How do you charge the mold fee?
A: Incase we need to open new mold for your ordered profiles ,the mold fee will be refounded to customers when your order quantity reaches a certain amount.
Q7. What is the differences between theoretical weight and actual weight?
A: Actual weight is the actual weight including packaging. Theoretical weight is identified according to the drawing,calculated by of the weight of each meter multiplied by the length of profile.
Q8. How do you quote price , per ton or per meter?
A: Weiye Aluminum Factory provide more than two pricing modes
Q9: How many years of your windows and doors product warranty ?
A: 10~20 years for different surface
Q11: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, Weiye Aluminum Factory can do according to the color samples you provide.
Q12: How's the weather resistance for wood grain finish D1010?
A: (1). Powder: Akzo Noble Interpon D1010.
(2). Wood grain film: Italian Menphis.
(3). Standard complied: American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather: 10 years color guarantee.
Q13: What certification do you have? What's your standard?
A: Weiye Aluminum Factory have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB. We got more certification from Norway and other counntries, we also passed the related certification of miltary industry.
Q14: What's the delivery time for samples and mass production?
A: (1). 1-2 weeks to open the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
Q15: How much the shipping cost is ?
A: The shipping cost changes every month. From China to Sydney/Melbone is about USD650 for 1 20ft container.
Q16: How do you pack your product?
A: Packing steps for aluminum windows:
Step 1.Protective tape protects frames from scratches;
Step 2.Keep windows fixed on iron pallets;
Step 3.Tie up windows on the iron pallets with plastic belts;
Step 4.PE films keep windows away from sea water;
Step 5.Fill in the space between each two iron pallets by air bags;
Step 6.Tie up iron pallets in container with plastic belts.
Our packages will ensure the windows arrive at project jobsite in good conditions.
Q17. Are you supplying standard sizes of windows/doors or customised products ?
A: Both are available. Weiye Aluminum Factory have our own designed windows/doors series, and we also supply customised products for lots of end customers,developers and builders.
Q18. Is there any price difference between powder coating and anodizing ?
A: Yes, there is little difference. Different surface finish will make little different cost difference.
Weiye Aluminum Factory recommend you to choose anodized finish if the house is near salt water for long-effective corrosion resistance,but powder coating will be better if the house is far away from salt water.
Q19. What kinds of hardware can you supply ?
A: Commonly Germany brand,China top brand and other customers appointed brands.Weiye Aluminum Factory recommend you to use the local brand. Because it will be easy for you to replace.
You Might Also Like
S6-150 Gearbox Spare Parts Synchronizer Ring 1297 304 484 fo......
Dongfeng Mini 4cbm 5cbm Vacuum Sewage Truck
Luxury Custom Cardboard Paper Clothing Packaging Box
Automatic Sectional Garage Door Motor
Pure Tungsten Target for Sputtering Coating/Chamfer 45 Degre......
NiCd AA 700mAh 7.2V 9.6V Rechargeable Battery Pack with Plug
290mm Night Use Belted Ultra Thin Feminine Hygiene Pad
2/5/10m USB LED String Lights Bulb Outdoor Waterproof Garlan......
5ml Cylinder Essential Oil Glass Vial with Rubber Dropper
Prepianted Color Coated Aluminum Strip Coil for Transformer
RF Coaxial Connector Qma Female Solder for Rg405 Cable
Nal -800g5 Automatic Plastic Material Vacuum Auto Loader