China 110kHz Fish Finder Transducer Ultrasonic Transducer for Fish Finder, Find details about China Ultrasonic Transducer Water Depth, Ultrasonic Depth Transducer from 110kHz Fish Finder Transducer Ultrasonic Transducer for Fish Finder
Items | Technical Parameters | Image | |
Name | 110KHz fish finder transducer | ![]() ![]() | |
Model | PHW-110 | ||
Frequency | 110KHz±5% | ||
Detection Distance | 0.6~40m | ||
Minimum Parallel lmpedance | 220Ω±20% | ||
Capacitance | 1400pF±20% @1KHz | ||
Sensitivity | Driving Voltage:700 Vpp,Distance:0.65m, Echo Amplitude:3.0 V | ||
Operating Voltage | Peak Voltage<750VPP | ||
Operating Temperature | -40~+80ºC | ||
Pressure | ≤3Kilos or 0.3MPa | ||
Angle | (Beamwidth) Half-power Beam Width @-3dB:38°±4°, Sharp Angle:100°±8° | ||
Housing Material | plastic | ||
Usage | underwater fish finder transducer | ||
Installation Dimension | Checking product structure diagram below | ||
Protection Level | IP68 | ||
Weight | 28g±5% | ||
wiring instructions | Integrated Interface:Red: transducer+,White: transducer-, Black: shielded wire,( without temperature sensor) | ||
Admittance Curve | Product Structure Diagram | ||
![]() |
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor