Products

Foundry Molten Metal Filters Ceramic Foam Filter

China Foundry Molten Metal Filters Ceramic Foam Filter, Find details about China Alumina Ceramic Foam Filter, Silicon Carbide Ceramic Foam Filter from Foundry Molten Metal Filters Ceramic Foam Filter

Model NO.
SF-CFFAL
Trademark
SEFU
Transport Package
Cartons with Pallet
Specification
1.1*1.1*0.12
Origin
China
HS Code
6909110000
Model NO.
SF-CFFAL
Trademark
SEFU
Transport Package
Cartons with Pallet
Specification
1.1*1.1*0.12
Origin
China
HS Code
6909110000

Foundry molten metal filters ceramic foam filter

Descerption :


Ceramic follicle foamers are only developed as a new type of molten metal filter to reduce casting defects. They play a vital role in the metal casting and foundry industries. They are used to filter out impurities in molten metal. Improve quality and performance. A "filter cake" is formed on one side of the inlet filter, and deep filtration is carried out inside the ceramic matrix, so these ceramic foam filters are an effective tool to achieve the metallurgical purity of molten metal during the casting process. The filter also stabilizes the filling of the mold, thereby preventing undesirable defects in the casting. The type of ceramic foam filter especially depends on its application requirements. Therefore, in practice, filters for filtering non-ferrous metal alloys (casting temperature up to 1000°C), filters for filtering sheet and spherical graphite cast iron, and filters for filtering steel are used. Depending on the casting material, filters based on Al2O3, SiC, ZrO2 or graphite can be used.
In the ceramic industry, they are used to filter impurities in molten metal to improve the quality and performance of the final product.
Ceramic foam filters require precise performance under extreme high temperatures and harsh conditions, and must meet the highest standards in terms of performance, durability and heat resistance. This is where the expertise and engineering expertise of technology bubble services stand out. As a recognized leader in engineering-based foam conversion, our products are used by some of the most well-known foundries around the world for casting aluminum, steel, iron and copper.

We can supply ceramic foam filters are as follows:

 1.Silicon carbide ( SiC) is used as a distinctive element in the refractory mixture material to make foam filters. Gray in color, foam filter is a strong and durable foam filter, which can be used  to purge and filter solution of ductile iron casting, grey iron and other iron casting.
2. Zirconia Ceramic Foam Filter is applied to purge and filter solution of steel high temperature metal such as steel alloy stainless steel etc.Typical application of zirconia ceramic foam filter is for in-mold, tundish, pouring cup or baffle-type filtration.
3. Alumina Ceramic Foam Filter is applied to purge and filter solution of aluminium and aluminium alloys.  White in color alumina foam filter is made from high purity alumina (AI2O3).  It has excellent ability to resist high thermal shock while maintaining efficient removal of impurities with continuous and thorough filtration.


Advantage of Ceramic Foam Filters
  1. Simplified and shorten gating system,increasing yield.
  2. High strength without loose ceramic particles or powder
  3. Remove tiny slag effectively and purify molten metal.
  4. Three dimensional connected mesh structure and high porosity
  5.  Well-distributed molten metal and improve performance.
  6.  Quiet laminar flow of molten metal.
  7. Smaller particles are captured on the filter cake created by the larger particles , finer particles are captured within the pores in the filter.



Principle Of Using Filter:
• Set the filters as close as possible of the casting.
• Use simple gating system without dirt trap ( improve yield).
• The working area of filter should be 4-6 times of the section of chocked flow in gating system to make
sure that the pouring speed is not affected.
• Select the proper filters according to types of metal and pouring temperature.
• The higher porosity, the better filtration.




Detailed Images            

Foundry Molten Metal Filters Ceramic Foam Filter
Foundry Molten Metal Filters Ceramic Foam Filter
                              
Foundry Molten Metal Filters Ceramic Foam FilterFoundry Molten Metal Filters Ceramic Foam Filter

Shipping                                                 
Lead time: 10-15days after signed the contract 
Foundry Molten Metal Filters Ceramic Foam Filter

Packing                                                 
  1.  Inside packing: Filters are put in small box and Layered packaging. There is cardboard between each layer.
  2. Outside packing: Cartons&Pallets. Three layer corrugated cartons and export special pallets .
  3. The mark on cartons can be designed according to the customer's request.  

Foundry Molten Metal Filters Ceramic Foam FilterFoundry Molten Metal Filters Ceramic Foam Filter

FAQ                                                                   
Q: Are you Factory?
A: Definitely, we are factory.  Welcome to visit us!
Q: What Parameters should I provide to you for proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms. 
Q:How can you control your quality? 
A:For each production processing, we have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time? 
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provide samples for testing, pls send detail parameters to us. (if customized, with drawing is best) The samples will be charged or free according to the specific requirements.
Q: What's the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honor to offer you the samples.
Q: What about your Packing?
A: We provide carton box, pallet, etc. OEM packing available too.
Q: Do you have R&D services?
A: Yes, we have R&D department to assist you in new product development.
Q:Does your company accept customization?
A:We accept OEM service.
Q:Can we visit your company?
A:Yes, for sure, you are welcome to visit our company.

Contact us                                        
Foundry Molten Metal Filters Ceramic Foam Filter

Foundry Molten Metal Filters Ceramic Foam Filter
Cangzhou Sefu Ceramic New Materials Co.,Ltd. 

You Might Also Like