cross-roller bearing material 42CrMo / bearing steel GCr 15 /bearing

LYDZC product overview and selection guide


RK6-16P1Z Bearing structure drawings,If you need more details, please email us to  

 
If these are not exactly the same as you need, contact LYDZC for custom specifications, such as different installation holes, internal clearance, positioning pin size, drive device layout, or  





LYDZC Bearing Parameter Table
RK series four-point contact ball bearings
HS series four-point contact ball bearings
HT series four-point contact ball bearings
MT series four-point contact ball bearings
RK, HS, MT series with Pinion
KH series four-point contact ball bearings
XT series four-point contact ball bearings
DT series eight-point contact ball bearings
XR series cross roller bearings
TR series three-row roller bearings 
 

Introduction to LYDZCRK series precision bearings:
RK series bearings have flange on one or two rings, size range is outer diameter
20-47 inches(500-1200mm). The flange design reduces weight and allows the device setter to more flexibly design the shape of the adjacent installation structure and the arrangement of bolts. The RK series is suitable for a variety of applications when the weight of the foot is light as the dominant factor in the selection of bearings.
Design characteristics: Its internal structure is deep groove Raceway, pass
The ball reaches four points of contact so that the bearing can bear the load of radial, axial and moment simultaneously. The spacing between the spacer ball and the bearing ball can reduce the torque of rotation resistance, and better performance can be achieved in the case of swing motion. The perfect phase seal can help remove pollutants.
RK series bearings have teeth, inner teeth and outer teeth, providing designers with the greatest flexibility of choice. The bearing adopts an involute short tooth design with a pressure angle of 20 degrees and can achieve AGMA Q5 accuracy. The allowable tooth side gap is 0.005 to 0.015 inches.
All this type of bearing has 4 oil holes with an interval of 90 degrees. Axial bearing without teeth and inner teeth, oil mouth located at outer diameter steps
(Dr). The bearing of the outer tooth, the oil mouth is located at the inner diameter ladder(Dr).

Supply capacity
RK series bearings are kept in stock in the warehouse. For toothed products, the matching Pinion is also a warehouse store. For confirmation of Pinion, see page 70.
field of application
RK series bearings have a wide range of applications in light load and medium load field combinations, 

including:
Small Crane, boom and elevator.
Industrial position sensors and turntables.
Rotation slot
Stretching packing machine
Bottling machine
Conveyor and related handling equipment
Rotation display