LED bulbs shadeless oral lamp sensor  light for dentist

Layout and Configuration:

Working Environment:
 

Technical Parameters:

Installation method:

1. Plug and connect the terminal connectors as shown in Figure 1, to ensure reliable connection of the connector;
2. As shown in Figure 2, insert the shaft of the lamp arm and the base of the lamp into the inner hole of the
lamp arm and align it with the screw hole. Tighten the hexagon socket screw with a tool.
3. Insert the trim cover into the lamp arm as shown in Figure 3.


Instructions:

1. Adjusting the color temperature: Click the Color temperature adjustment key to change the color temperature. the indicator light blue,green and red represent cold white, positive white and warm white.

2. Turn on/off the anti-cure mode: Click the Anti-cure key to turn on the anti-cure lighting mode. In this case, the blue component of the light is filtered out and the composite material can be used for a long time. Slide right to normal operation mode.

3.The product has a brightness memory function, which will enable the brightness of the last off when it is turned on to work.

4.Both sides of the outer handle, press the top of the Bowen button to pull out, the handle can be removed, easy to clean and disinfect.