China Winext Gateway for Lorawan with 4G LTE WiFi Cat-6, Find details about China Winext Gateway, Lorawan Gateway from Winext Gateway for Lorawan with 4G LTE WiFi Cat-6
Winext gateway is an electronic device that gathers data and transforms the LoRaWan protocol to other protocols. It's a standard IoT gateway applied in connection with modern Internet of Things (IoT) networks, which plays an important role in data collection, transformation, transmission, and processing.
Model No.?
Winext GW1000, the gateway as shown above with 2 or 3 antennas.
What is GW1000 gateway?
GW1000 is a light indoor gateway, it's normally used on the LoRa networks for a small scale as a supplement device. It's applied often for areas with no NB-IoT network.
This gateway is equipped with SX1308 chip, it complies with LoRaWANTM. Receiving data from 8 channels at the same time, it has data packed into Ethernet data protocol packets, transmits data to LoRaWANTM network server in real-time. Meanwhile, it can accept the single task from the network server, convert Ethernet data into radio frequency data and send them to corresponding end-devices. It provides technical solutions for the bidirectional transmission of the Internet of Things.
Description | Specifications |
Master control | Qualcomm 9531 master control chip, 128M memory, 16M Flash |
Power supply | DC12V |
LoRa frequency | CN470-510/EU863-870/US902-928/AS923/AU915-928/KR920-923 |
LoRa communication rate | 292bps - 5.4kbs, support spread factor SF7-SF12 |
LoRa Tx power | 17dBm Maximum power: 20dBm (at the antenna mouth) |
LoRa Rx sensitivity | -141dBm@SF12 |
LoRa antenna gain | 2dBi |
LoRa antenna type | Omni-direction |
Channel | 8 uplinks, 1 downlink |
LoRa working mode | Half-duplex |
Base station | Network |
LTE model | Frequency supported by 4G module for China: LTE-TDD : B38/B39/B40/B41 LTE-FDD: B1/B3/B5/B7/B8 TD-SCDMA: B34/B39 UMTS:B1/8 EVDO: 800MHz CDMA1x: 800MHz GSM: 850/900/1800/1900 |
Frequency supported by 4G module for US: FDD LTE:B2/B4/B12 WCDMA: B2/B4/B5 | |
WiFi | 2.4GHz, AP mode, Maximum power: 18dBm |
Data backhaul | 10/100M Ethernet, 3G/4G |
Debug interface | WiFi; LAN; serial port |
Temperature | -10ºC~50ºC |
Humidity | 5%~95% |
Consumption | 7W |
Dimension | 180mm*115mm*168mm |
Software:
Description | Specification |
Cornel | Linux-4.14.88 |
LoRa protocol | LoRaWANTM V1.1 GWMP protocol, Class A/C |
User interface | WEB interface |
Language and interface | Chinese/English, logo available or not |
3G/4G dial networking | Support QMI-Qualcomm universal dialing |
Local time synchronization | Support NTP client, different time zones can be set |
Upgrade and flash | Support upload firmware fresh in WEB and OTA remote upgrade |
WiFi connect to gateway | 2.4GHz, 802.11bgn, WPA2 PSK encryption, support remote upgrade |
Firewall | IP tables v1.8.2, support customized rule, equipped with STA+AP protection |
Network load balancing | Support WAN and 4G network connection, WAN network preferred |
Gateway ID generate automatically | Gateway ID generated based on WiFi MAC address |
Local log management | Support logs stored in TF card, when it full to clear the old one |
Fault self-diagnosis | Support system self-diagnosis, and report results |
Remote management | Support to report gateway and WAN, 4G, WiFi, LoRa, TF card status in a period, support remote downlink configuration parameters, remote upgrade, remote reboot, remote maintenance |
√ Support LoRaWANTM latest protoco√ stack LoRaWAN1.0.2, LoRaWAN 1.0.3, LoRaWAN1.1,
√ Compatible with other LoRa end-device
√ 8 uplinks channel, 1 downlink channel, support adaptive data transfer rate
√ Support wired network, LTE available,4G version, WiFi, support WAN/4G network connection switch automatically
√ LTE version optional
√ for China, Europe, US respectively. Chinese version suitable for China mobile, China Unicom, China Telecom; support 4G network reconnection
√ Support WiFi spot
√ Support USB storage and device extension
√ Support status check on WEB and modify configuration
√ Support firewall
√ protection and DNS parsing rebinding protection
√ Support remote OTA upgrade, self-diagnosis, and repair
√ Support TF card log storage
√ Support anti-theft key design
1. Can I use this gateway for home internet?
This gateway is designed and used for IoT smart devices that communicate with LoRa protocols, such as smart electric meters, smart water meters, gas meters, physical sensors and etc. It's not suitable for connecting your personal PC to the internet. For that purpose, a normal router is better.
2. Can I use this gateway for large-scale commercial use?
No, this indoor LoRaWan gateway is used for small-scale or simple applications. If the number of devices is not too big, it works. If you have several hundred of LoRa IOT devices, we recommend you to view our other gateway products with higher configuration of hardware to gain high capacity.
3. What's the minimum quantity of purchase?
Normally the MOQ shall be 10 sets. But we are open to retail. The price will be higher.
4. Can this LoRaWan gateway be used in the US?
Yes, the 4G module support FDD LTE:B2/B4/B12 and WCDMA:B2/B4/B5 network in America.
5. Cant his LoRaWan gateway be used in Europe?
Yes, the 4G module support below network in Europe:
FDD LTE:B1 / B3 / B5 / B8 / B20
TDD LTE:B38 / B40 / B41
WCDMA: B1 / B5 / B8
GSM: B3 / B8