Products

Silicone Rubber Thermal Insulation Pad with High Thermal Conductive

China Silicone Rubber Thermal Insulation Pad with High Thermal Conductive, Find details about China Silicone Gap Pad, Thermal Insulation Pad from Silicone Rubber Thermal Insulation Pad with High Thermal Conductive

Model NO.
PM460
Classification
Organic Insulating Material
Certification
UL
Color
Grey
Brand
Jrft
Thickness Tolerance(Mm)
0.05+-0.01
Thickness(Mm)
0.25--5.0
Specific Gravity
2.05
Hardness(Shore a)
50+-5
Thermal Conductivity(W/M-K)
4.6
Model NO.
PM460
Classification
Organic Insulating Material
Certification
UL
Color
Grey
Brand
Jrft
Thickness Tolerance(Mm)
0.05+-0.01
Thickness(Mm)
0.25--5.0
Specific Gravity
2.05
Hardness(Shore a)
50+-5
Thermal Conductivity(W/M-K)
4.6
Product Introduction
JRF-PM460 is based on the high thermal conductivity of silica, boron nitride and aluminum oxide powder mixed into, the product can meet the requirements of heat radiating occasions for high and stable insulation performance. The product has good thermal conductivity, at the same time, this product has the self adhesive ,application and operation is simple and convenient.

JRF-PM460 is use of soft silicone material thermal conductive, good insulation performance, soft and elastic characteristics, placed between the power heating device and heat dissipating structure, the power module generates heat effectively transmit to the radiating component.

Applications:
1. Car engine module and vehicle electronic equipment
2. Notebook computer, table computer CPU
3. Flat panel TV, mobile equipment, high-speed hard disk driver
4. Semiconductor and the radiating fin between
5. Computer, PC server, workstation
6. LED lighting device and mass storage device

Performance and characteristics:

1.High thermal conductivity, heat transfer coefficient 4.6W/m-k
2.Stable performance , low thermal resistance, effectively improve the heat transfer speed
3.Low hardness , its viscosity high, easy to use adhesive
4.By UL and V-O certification standards 

Specification:
Standard size 310mm*310mm, 200mm*400mm according to customer needs cutting type
Basic thickness 0.25mm*5.0mm, special size and thickness can be customized
Itself is slightly viscous, if need to strengthen the adhesive can be according to customer' requirement.
Product color is mass production, if need special color can be adjusted according to the actual situation .
Silicone Rubber Thermal Insulation Pad with High Thermal Conductive

Silicone Rubber Thermal Insulation Pad with High Thermal Conductive


Silicone Rubber Thermal Insulation Pad with High Thermal Conductive

You Might Also Like