SBS  ( styrene-butadiene-styrene ) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt ,glass fiber or glass fiber polyester felt as reinforcement, finishing the upper surface with PE film, fine sand or mineral granule.

1. Pictures of product

2. Description of product

3.Main features 
1.Excellent resistance to root puncture,and don't affect the growth of plants.
2.Powerful waterproof membrane , resistance to mold,tear and corrosion.
3.Superior in environment friendly and energy saving.
4.Strong adaptability for high and low temperature,cold and hot area is all  applicable.
5.Strong adaptability for substrate shrinkage and crack.


 4. Pictures of production line
Welcome to visit our factory all the years 

5. Trade items of product

 6. All kinds of surface material 

7. Technical data of the product
    GB18242-2008
The specification can customized as requirement !

Thicknesses and specifications as shown below as the reference,can be customized.

Due to unique product formulation, the product has the longer life far beyond the usual waterproof material. The exposed water system is over 5--10 years on the roof and 30--50 years underground. It is widely used in construction and civil engineering.

8. Pictures of application

Construction way:
1)Situation
1.The base should be dry and clean. Do not work in the rainy or snowy day.
2.Do not work under heavy wind(above 5 grade)
3.Unsuitable for construction below 5°C
4.If it is rain or snow in the process of construction, protective measure to the laid membrane is must.
5.All the workers should put on special uniforms to keep safe when installing. There should be extinguisher for fire controls.


2)Torch applied method
1. Base processing: the base surface musts be clean,solid,level,dry;no grit,rift and loosing dust. For a large recess, fill it with cement mortar and then level it. Remove the protrusion and clean dust If working on base slab or lateral face,water lowering should be done.

2.Painting primer before laying the membrane, clean the dust on the surface of concrete base with dust catcher or dust-blower; then paint entirely with treatment agent of DIY primer for waterproofing(for purpose of dust consolidation and high adhesive effect).

3.Deal with the details and nodes in advance,such as,gutter, parapet..etc

4.Heat to melt: place membrane correctly, fire torch, heat the membrane with base entirely, when the surface of the membrane is black and bright with a fusion layer, apply the membrane and press it into a solid and flat state.Before the membrane is cool, seal the edge of joint .

5.Requirements for lapping: There should be less than 3 layers of lapping, with the joint seams appearing as"T" type,avoid 4 layers of lapping.The width of longitudinal lapping is between 50 and 80mm,and of end-lap joint 100mm

6.Use a roller to push hard the membrane surface to ensure it stick firmly.

7: Acceptance check.

9. Loading  and delivery of the product

Storage and transportation:
1.Different items, models, dimensions and grades should be stored separately.
2. Put the product in a dry ventilated place with the temperature lower than 50'c and the height less than 2 layers.
3.It will not be factory if any problems caused by wrong transportation or storage or the storage years are more than a year.
4.All the rolls should be erect without any putting across or incline. Cover the canvas when necessary.



10.Certificate 


11.Picture of Exhibition 

12. Why choose us?

 13. FAQ:

 1. Can you tell us the surface of the product?  PE film, Sand, Slate Flakes, Aluminum Foil.

 2. What's the thickness of the product you need?  We have 2mm, 3 mm, 4mm.

 3. What's the low temperature flexibility?  We have -25°C, -20°C, -15°C,-10°C, -5 °C,0 °C.  

 4. What's the reinforment of SBS/APP bitumen membrane?  We have polyester mat, compound mat, fiberglass mat.

 14. Welcome to Contact Us

send your enquiry details in the below, click "SEND" now.