Bright Surface and Hardness Epoxy Resin for Table Top Coating
China Bright Surface and Hardness Epoxy Resin for Table Top Coating, Find details about China Epoxy Table, Clear Epoxy from Bright Surface and Hardness Epoxy Resin for Table Top Coating
Basic Info.
Model NO.
113AB-2
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Mixing Ratio
3:1
Shelf Life
6months
Lead Time
3 Days
Curing Time
8 Hours
OEM
Available
Trademark
Jinhua glue
Transport Package
5kgs 20kgs
Specification
ROHS, REACH, CPSIA, PAHS
Origin
China
HS Code
3506912000
Model NO.
113AB-2
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Mixing Ratio
3:1
Shelf Life
6months
Lead Time
3 Days
Curing Time
8 Hours
OEM
Available
Trademark
Jinhua glue
Transport Package
5kgs 20kgs
Specification
ROHS, REACH, CPSIA, PAHS
Origin
China
HS Code
3506912000
Product Desciption
Feature
Epoxy resin 113AB-2 can be cured under normal temperature and elevated temperature, with good flowing property, natural defoaming, high hardness, no ripple, bright in surface.
Application
113AB-2 can be widely used for furniture, signs, crafts, crystal floor coating, etc
Detailed information
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection
caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1.The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4. Keep away from children.
5. Please take a trial before application to avoid usage mistake
Storage And Shelf Life
1. Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2. Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Company Profile
Shenzhen Jinhua Electronic Materials Co.,Ltd engaged in epoxy resin adhesive and the second-processing of hardener agent since 2009, our products range covers from clear resin, hard glass like epoxy coating, epoxy flooring, epoxy potting, fast dry 2 parts epoxy, crystal epoxy decoration, soft epoxy, and resin for LED lights,crystal clear polyurethane, urethane floor, urethane potting etc, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua professional in development, production and sales of clear epoxy resin AB glue and ployurethane with the factory area of 2000 square meter. All the equipment in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS, REACH, CPSIA, PAHS, EN71, make Jinhua to be the leading supplier in this field in China and gained high reputation from our customers during the past years
Below is some factory photo for your reference.
Certificates
Free samples are available! Please contact us for more details and tell us what you need!
Epoxy resin 113AB-2 can be cured under normal temperature and elevated temperature, with good flowing property, natural defoaming, high hardness, no ripple, bright in surface.
Application
113AB-2 can be widely used for furniture, signs, crafts, crystal floor coating, etc
Detailed information
| Model 113AB-2 | Main agent 113A-2 | Curing agent 113B-2 |
| Properties before Hardening | ||
| Color | Colorless transparent | Colorless transparent |
| Specific gravity | 1.15 | 0.96 |
| Viscosity(25ºC) | 1500-4000CPS | 100 MAXCPS |
| Conditions of Usage | ||
| Mixing ratio | A: B = 100:33(weight ratio)>3:1 | |
| Hardening conditions | 25 ºC×12H to 16H or 55ºC×2H (2 g) | |
| Usable time | 25ºC×50min (100g) | |
| Properties after Hardening | ||
| Hardness, shore D | >86 | |
| Withstand voltage, KV/mm | 22 | |
| Flexural strength, Mpa | 75 | |
| Volume resistivity, Ω·cm | 1.2x1014 | |
| Surface resistance, Ohmm | 2 5X1015 | |
| Withstand high temperature, ºC | 92 | |
| Moisture absorption, % | <0.15 | |
| Compressive strength, Mpa | 40 | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection
caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1.The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4. Keep away from children.
5. Please take a trial before application to avoid usage mistake
Storage And Shelf Life
1. Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2. Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.
Company Profile
Shenzhen Jinhua Electronic Materials Co.,Ltd engaged in epoxy resin adhesive and the second-processing of hardener agent since 2009, our products range covers from clear resin, hard glass like epoxy coating, epoxy flooring, epoxy potting, fast dry 2 parts epoxy, crystal epoxy decoration, soft epoxy, and resin for LED lights,crystal clear polyurethane, urethane floor, urethane potting etc, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua professional in development, production and sales of clear epoxy resin AB glue and ployurethane with the factory area of 2000 square meter. All the equipment in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS, REACH, CPSIA, PAHS, EN71, make Jinhua to be the leading supplier in this field in China and gained high reputation from our customers during the past years
Below is some factory photo for your reference.
Certificates
Free samples are available! Please contact us for more details and tell us what you need!
You Might Also Like
Plastic Paving Concrete Mold DIY Walkway Stones Mould Landsc......
Baroque Freshwater Pearl Necklace fashion Jewelry Jewellery ......
China Professional Made Super Big Size Ductile Iron Flange P......
Supermarket Storage Container Plastic Folding Stackable Coll......
Plastic Disposable Hitachi Beckman Sample Cup
Bulk Pen Drive Wood USB Flash Drive
Debo 5 Years Warranty HPL Toilet Cubicle Board
Luxury Hotel 1500 Supreme Collection Bed Sheet Set
Sodium Hyaluronic Acid Gel Injection for Lip, Face, Nose, Br......
Fenugreek Seed Extract 4-Hydroxyisoleucine for Improve Insul......
Rechargeable Battery 25ah 3.2V LiFePO4 Battery Cell
Radial Truck Tyre 10.00r20 11.00r20 12.00r20, TBR