Water Resistance Epoxy Resin for LED Shoe Light Casting
China Water Resistance Epoxy Resin for LED Shoe Light Casting, Find details about China Clear Epoxy Resin, Epoxy LED Light from Water Resistance Epoxy Resin for LED Shoe Light Casting
Basic Info.
Model NO.
2120AB-25D-2
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Shelf Life
6 Months
Weight Ratio
2:1
Curing Time
5-7 Hours
Sample
Available
Trademark
Jinhua glue
Transport Package
20kgs/Set
Specification
SGS, ROHS, STC
Origin
China
HS Code
3506912000
Model NO.
2120AB-25D-2
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Transparent
Shelf Life
6 Months
Weight Ratio
2:1
Curing Time
5-7 Hours
Sample
Available
Trademark
Jinhua glue
Transport Package
20kgs/Set
Specification
SGS, ROHS, STC
Origin
China
HS Code
3506912000
Product Desciption
Feature
Epoxy resin 2120AB-25D-2 is a moderate soft two parts epoxy resin adhesive, can be cured under normal temperature and high temperature for faster curing, with the feature of high transparency, low viscosity, natural defoaming, high transparent, etc.
Application
2120AB-25D-2 can be widely used for smart cards, drops of glue, underwater lamp potting and mold filling, etc..
Detailed information
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Company Profile
Shenzhen Jinhua Electronic Materials Co.,Ltd engaged in epoxy resin adhesive and the second-processing of hardener agent since 2009, our products range covers from clear resin, hard glass like epoxy coating, epoxy flooring, epoxy potting, fast dry 2 parts epoxy, crystal epoxy decoration, soft epoxy, and resin for LED lights, crystal clear polyurethane, urethane floor, urethane potting etc, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua professional in development, production and sales of clear epoxy resin AB glue and ployurethane with the factory area of 2000 square meter. All the equipment in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS, REACH, CPSIA, PAHS, EN71, make Jinhua to be the leading supplier in this field in China and gained high reputation from our customers during the past years....
Free samples are available! Please contact us for more details and tell us what you need!
Epoxy resin 2120AB-25D-2 is a moderate soft two parts epoxy resin adhesive, can be cured under normal temperature and high temperature for faster curing, with the feature of high transparency, low viscosity, natural defoaming, high transparent, etc.
Application
2120AB-25D-2 can be widely used for smart cards, drops of glue, underwater lamp potting and mold filling, etc..
Detailed information
| Model 2120AB-25D-2 | Main agent 2120A-25D-2 | Curing agent 2120B-25D-2 |
| Properties before Hardening | ||
| Color | Colorless transparent | Colorless transparent |
| Specific gravity | 1.15 | 0.96 |
| Viscosity(25ºC) | 1500-2500CPS | 250 MAXCPS |
| Conditions of Usage | ||
| Mixing ratio | A: B = 100:50(weight ratio) | |
| Hardening conditions | 25 ºC×5H to 7H or 55ºC×2H (2 g) | |
| Usable time | 25ºC×25min (100g) | |
| Properties after Hardening | ||
| Hardness, shore D | <78 | |
| Withstand voltage, KV/mm | 22 | |
| Flexural strength, Kg/mm2 | 28 | |
| Volume resistivity, Ohm3 | 1x1015 | |
| Surface resistance, Ohmm2 | 5X1015 | |
| Thermal conductivity, W/M.K | 1.36 | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Company Profile
Shenzhen Jinhua Electronic Materials Co.,Ltd engaged in epoxy resin adhesive and the second-processing of hardener agent since 2009, our products range covers from clear resin, hard glass like epoxy coating, epoxy flooring, epoxy potting, fast dry 2 parts epoxy, crystal epoxy decoration, soft epoxy, and resin for LED lights, crystal clear polyurethane, urethane floor, urethane potting etc, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua professional in development, production and sales of clear epoxy resin AB glue and ployurethane with the factory area of 2000 square meter. All the equipment in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS, REACH, CPSIA, PAHS, EN71, make Jinhua to be the leading supplier in this field in China and gained high reputation from our customers during the past years....
Free samples are available! Please contact us for more details and tell us what you need!
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece