The meter is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.
The features of small size and DIN-rail mounting make it suitable for installation in distribution boards and small standard enclosures.
The meter is widely used in the office buildings, shopping malls, residences, airports and metro,etc.
FUNCTIONS AND FEATURES
?35mm standard DIN rail installation,complying with standard DIN EN50022.
?Two poles width.
?Step motor type impulse cyclometer display (standard 6+1 digits) or clients defined.
?Standard configuration one port of pulse output passive (polarity).May select increase a distant port of pulse output passive
(nonpolarity). And contact with all kinds of AMR system conveniently.Complying with standard IEC62053-21 and DIN43864.
?Bicolor LED instructions respectively power supply state (green) and signal or power impulse(red).
?Automatic detection the direction of the trend of load current. And Instructions on individual LED (Only red power impulse signal when
working.If no green power means the load current is reverse).
?Single direction measures single phase two wire active power consumption.It is nothing with direction of the flow of load current, complying with standard IEC62053-21,IEC62052-11. Anti-tampering function is available.
?Directly connect operation.
?Standard configuration short terminal cover, which is helpful to reduce installation space and make it convenient to install;May select extended terminal cover, which is for protecting the safety of using electricity.


Model: LCD 20100L
Counter 20100M
Rated Voltage: 110V, 220V, 230V, 240V
Rated Current: 5(32)A, 5(40)A, 5(50)A, 5(80)A
Accuracy Class: 1.0, 2.0
Frequency: 50/60Hz
Impulse Constant: 1000imp/kWh, 2000imp/kWh
Display: LCD, Counter
Power Consumption: ≤8VA, ≤0.4W
Start Current: 0.4%Ib
Connection Mode: Direct type
Standard: IEC62052-11, IEC62053-21
DIN EN 50022, DIN43880