Waterproof Bathroom Coating Factory for Cement Wall Paint Absorbing Materials Acrylic Polyurethane for Building Products
China Waterproof Bathroom Coating Factory for Cement Wall Paint Absorbing Materials Acrylic Polyurethane for Building Products, Find details about China Polyurethane Liquid Coating, Polyurethane Coating Liquid from Waterproof Bathroom Coating Factory for Cement Wall Paint Absorbing Materials Acrylic Polyurethane for Building Products
Basic Info.
Function
Waterproof
Certification
ISO
Color
Black
Usage
Outdoor
Trademark
BAIZHOU
Transport Package
Drums
Origin
China
Function
Waterproof
Certification
ISO
Color
Black
Usage
Outdoor
Trademark
BAIZHOU
Transport Package
Drums
Origin
China
Product Desciption
Waterproof Bathroom Coating Factory for Cement Wall Paint Absorbing Materials Acrylic Polyurethane for Building Products
1.Pictures of product
2.Characteristics
High adaptability to wet and dry base layer, not flowing on elevation
Pigment can be added as you wish
High elasticity and high durability.
Poison-free and odor-free, no pollution, easy construction, short in construction time.
Ventilation property, no blistering even on wet base layer.
Grade I/II:
3.Advantage
4.Construction Requirement
Basic requirements rigid smooth without sundry, interna angle and external angle to make circular arc, the diameter of internal angle greater than 50mm, the diameter of external angle ia more than 10mm
Large waterproof construction: hybrid coating rubber or plastic scraper uniform coating for thickness is consistent, general of 1.5 mm to 2.0 mm, appropriate is three to four times after brush, brush time should be in previous besmear brushs curing film, and the vertical direction is generally brushed, separate film, underground engineering floor should increase spread a layer of fetal body reinforcing material.
Coating thickness: underground engineering 1.2 2.0 mm, the general should be 1.5 mm, lavatory bath room should not be less than 1.5 mm, exposed roof engineering using multichannel waterproof, each thickness not less than 1.2 mm, the waterproof grade III roof a fortification, waterproof thickness not less than 2 mm, between the coating and spread tire body reinforced material, tire body the following coating thickness not less than 1.0 mm, top coating not less than 0.5 mm
Act the role of facing construction: in the brush real last side coating not before curing surface dilute and clean grains of sand
Cover: coated membrane surface should be according to the design requirements for isolation protection.
11. Why choose us?
12. Welcome to contacting us.
1.Pictures of product
2.Characteristics
High adaptability to wet and dry base layer, not flowing on elevation
Pigment can be added as you wish
High elasticity and high durability.
Poison-free and odor-free, no pollution, easy construction, short in construction time.
Ventilation property, no blistering even on wet base layer.
Grade I/II:
| Tensile strength / MPa >= | 1.90 | |
| Elongation at break / % >= | 550 | |
| Tearing strength/(N/mm) >= | 12 | |
| Foldability at low temperature / ºC <= | -40ºC | |
| Watertightness 0.3MPa 30min | Water resistant | |
| Solids content / % >= | 80 | |
| Surface drying time / h <= | 12 | |
| Hard dring time / h <= | 24 | |
| Heating expansion rate / % | <= | 1.0 |
| >= | -4.0 | |
| Aging property | Heat aging | No crack and deformation |
| Artificial weathering aging | No crack and deformation | |
| Tensile strength / MPa >= | 2.45 | |
| Elongation at break / % >= | 450 | |
| Tearing strength/(N/mm) >= | 14 | |
| Foldability at low temperature / ºC <= | -40ºC | |
| Watertightness 0.3MPa 30min | Water resistant | |
| Solids content / % >= | 80 | |
| Surface drying time / h <= | 12 | |
| Hard dring time / h <= | 24 | |
| Heating expansion rate / % | <= | 1.0 |
| >= | -4.0 | |
| Aging property | Heat aging | No fault and deformation |
| Artificial weathering aging | No fault and deformation | |
3.Advantage
4.Construction Requirement
Basic requirements rigid smooth without sundry, interna angle and external angle to make circular arc, the diameter of internal angle greater than 50mm, the diameter of external angle ia more than 10mm
Large waterproof construction: hybrid coating rubber or plastic scraper uniform coating for thickness is consistent, general of 1.5 mm to 2.0 mm, appropriate is three to four times after brush, brush time should be in previous besmear brushs curing film, and the vertical direction is generally brushed, separate film, underground engineering floor should increase spread a layer of fetal body reinforcing material.
Coating thickness: underground engineering 1.2 2.0 mm, the general should be 1.5 mm, lavatory bath room should not be less than 1.5 mm, exposed roof engineering using multichannel waterproof, each thickness not less than 1.2 mm, the waterproof grade III roof a fortification, waterproof thickness not less than 2 mm, between the coating and spread tire body reinforced material, tire body the following coating thickness not less than 1.0 mm, top coating not less than 0.5 mm
Act the role of facing construction: in the brush real last side coating not before curing surface dilute and clean grains of sand
Cover: coated membrane surface should be according to the design requirements for isolation protection.
5.Attention:
Remove the water, oil, dirt on the base before use;
Bonding base surface should be dry, moisture content 8%;
Tape should be stored in dry and shade places, avoid heat source, avoid direct sun and rain
The product is self-adhesive materials, should stick on the right place in one time, unfavorable to reuse;Forspecial use tape, please contact us
6.General painting construction method, this method is suitable for the overall waterproofing of roofs, exterior walls, etc., as well as the construction of small cracks and cracks. It can be used immediately after opening the cover, and the construction is simple
7.Repairing large cracks, expansion joints, etc. This method is suitable for waterproofing and repairing large cracks in the roof, expansion joints and the joints of buildings.
8.The cured film is smooth and free of impurities
9.Packing and delivery
10.Certification
Bonding base surface should be dry, moisture content 8%;
Tape should be stored in dry and shade places, avoid heat source, avoid direct sun and rain
The product is self-adhesive materials, should stick on the right place in one time, unfavorable to reuse;Forspecial use tape, please contact us
6.General painting construction method, this method is suitable for the overall waterproofing of roofs, exterior walls, etc., as well as the construction of small cracks and cracks. It can be used immediately after opening the cover, and the construction is simple
7.Repairing large cracks, expansion joints, etc. This method is suitable for waterproofing and repairing large cracks in the roof, expansion joints and the joints of buildings.
8.The cured film is smooth and free of impurities
9.Packing and delivery
10.Certification
11. Why choose us?
12. Welcome to contacting us.
You Might Also Like
Automatic Parallel Paper Tube Machinery with Tube Cutting Fu......
Hydroponics Grow Medium Expanded Clay Pebbles for Agricultur......
Super Linen Printing Cloth for Sofa Fabric Round Blanket
Factory Supply 99% Original Powder Idebenone CAS 58186-27-9 ......
Standing Seam Roof Roll Forming Machine ( YX65 -400-425)
Fascia Physiotherapy Fitness Massager for Muscle Relexing Ma......
6mm Steel Coil Decoiler Straightener Feeder
2021 China Made Shoes Hot Selling Shoes PU Upper Children Sp......
0.55kw Aluminum Gear Speed Variator Model Jwb-X0.55b-190f
Mirror Polish Alumina Ceramic Disc Plate Ring