Products

2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender

China 2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender, Find details about China Laboratory Homogeneous Emulsifier, Small Lab-Use Vacuum Emulsifying Mixer from 2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender

Layout Type
Verticle
Operating type
Cycle Operating
Condition
New
Trademark
ERIC
Transport Package
Wooden
Specification
580mm*430mm*850mm
Origin
China
Layout Type
Verticle
Operating type
Cycle Operating
Condition
New
Trademark
ERIC
Transport Package
Wooden
Specification
580mm*430mm*850mm
Origin
China
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender
ERIC-2L SS UP Laboratory homogeneous emulsifier

I. equipment introduction
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender

Vacuum emulsifier is mainly composed of emulsifier, vacuum system, lifting system, electrical control system, etc.
 
The equipment is mainly used in daily chemical care products, biomedicine, food industry, coating ink, nano materials, petrochemical industry, printing and dyeing auxiliaries, paper industry, pesticide and chemical fertilizer, plastic rubber, power electronics, other fine chemicals, etc., especially for material emulsification configuration with high matrix viscosity and solid content.
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender
 
 
II. Equipment features
 
★ the company produces various types of vacuum emulsification, in which the homogenization system is divided into upper homogenization, lower homogenization, internal and external circulation, and the mixing system is divided into single-phase mixing, two-way mixing and spiral mixing; and it can customize various qualified and high-quality products according to customer requirements;
 
★ frequency converter is used for speed regulation of mixing, which can meet the production requirements of different processes;
 
★ homogeneous structure of German technology, with imported double face mechanical seal effect
 
★ vacuum defoaming makes the materials meet the aseptic requirements, and vacuum suction is used, especially for powder materials to avoid dust flying;
 
★ the lifting device can be selected for the main pot cover, which is convenient for cleaning and has more significant cleaning effect. The pot body can be selected for dumping;
 
★ the pot body is composed of three layers of stainless steel imported plate welding, and the tank body and pipeline are mirror polished, fully in line with GMP requirements;
 
★ according to the process requirements, the tank body can heat and cool the materials, and the heating methods mainly include steam and electric heating;
 
★ in order to ensure the requirements of the whole customer, the electrical appliances can be imported configuration, which can completely meet the international standards.

Main technique parameters
 
The main pot
Serial numberProduct nameTo configure Remarks
1Mixing method1.A one-way paddle with a scraping wall,power 0.12KW,speed 0-180r/minFrequency control  ,Scraped wall material polytetrafluoroethylene or silica gel
2.Homogenizer power 0.5KW,Speed 10000-28000r/minGermany Milwaukee Homogenizer
2Sealing processmachine seal 
3Boil the wayElectric lifting 0.05KW 
4Feeding modeManual dumping ,Bottom manual discharge 
5Temperature displayResistance thermometer(≤140ºC) 
6Heating and cooling nodeElectric heating, water cooling 
7Pressure vacuum displayVacuum meter(gauge) max  -0.07Mpa 
8Main process parameters1.Working pressure of jacket 0.1Mpa 
2.Maximum working volume 2.5L 
3.Effective working volume 2L 
4Minimum working volume 1L 
9Material 1.contact material all is 316L,thickness 3mm 
2.jacket SUS304,thicnkess 2.5mm 
3.out shell pot material SUS304,thickness 2.5mm 
10Polishing More than 300m polishing result 
11Cleaning Bottom clean or manual hand shake out clean  
12Size 580mm×430mm 
13high850mmHeight of the main pot cover
1100mmRaising height of main pot cover
14Voltage 220v/ 60hz 
15otherscontact material all is 316L 
16Weight 55kgs 
 
    
Matching combination
Serial numberProduct nameTo configureRemarks
1BracketAll stainless steel support 
2Emulsification cookerMaterial filter,spice bucket,air filter etc 
3Material pipe316l stainless steel pipe is used in contact with material 
4Electric control system The main pot is integrated, and the manual button fully controls the main potUse the manual button
 
Power consumption
Serial numberProduct nameTo configureRemarks
12L Emulsification pot1. Frame blade mixing 0.12KW 
2.homogenizer 0.5KW,homogeneity
3Lifting power 0.05KW
2vacuum pump0.125KW 
                                              GERMANY HOMOGENIZER MOTOR      TENGYUAN VACUUM PUMP  ELECTRIC MOTOR
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender
2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender



FAQ
 
1. Is your company a manufacturer or trading company?
 
A1: We are a professional manufacturer, specializing in designing and manufacturing whole set of equipment for daily chemical, pharmaceutical and chemical industry, and we also supply heat exchanger, LNG vehicle cylinders, as well as related technical service.
 
2. Where is your company? How can I get there?
 
A2: We are in Gaoyou City, Jiangsu Province, China. It takes about 4 hours By car or bus from Shanghai Airport, and High speed train rail way station will be put in use at the end of 2020, which will be helpful to shorten the time to Shanghai.
 
3.What is your quality control procedure?
 
A3: We strictly follow ISO9001 QC procedure and we have got the TUV and ISO certificates. Moreover, before shipment, we carry out tests and inspections for each machine. Customers can also come for supervising.
 
4.What are your core business?
 
A4: We are a specializing in designing and manufacturing whole set of equipment for daily chemical, pharmaceutical and chemical industry, and we also supply heat exchanger, LNG vehicle cylinders, as well as related technical service.
 
5.How long is your lead time if I place order?
 
A5: Usually no longer than 30 days.
 
6.What is your payment term?
 
A6: 30% advance payment against PO, 70% balance after testing and before shipment. We accept LC at sight, TT, PayPal, etc.
 
7.What is your warranty? And how is your after-sales service?
 
A7: We offer one-year warranty. During this warranty, if there is any part with issue due to machine itself and isn't caused by improper operation, we will provide new spare part at our cost. Furthermore, we provide lifelong after-sales services for our machines and we supply spare parts with cost prices for future maintenance/repairs.

 

2L Ss up Homogenizer Mixer Machine Small Lab-Use Vacuum Emulsifying Mixer Blender

 

You Might Also Like