USB Car Aroma Diffuser Facial Hydrating Spray Nano Mist


Package include:

1 x Transparent cover
1 x 30ML Aquarius
1 x USB line
1 x Cloth handbag
1 x Description and safety code
1 x Certificate









Usage method:
A water tank is filled with water.
1 let the machine upright (vertical position), a finger pressing and sliding down the back cover until I heard the snap, and lift it up and remove the back cover. (Figure 1)
2 place the machine up (horizontal position) and pull it out of the reservoir, firmly hold both sides to remove the container and be careful not to let the water out. (Figure 2)
3 by adding water to water storage container, excess water dry outside of containers. (Figure 3)
4 the machine to keep up, the container will firmly put back filled with water in the machine, please make sure that the water outlet hole and hole alignment. (Figure 4)
5 re install the cover and slide up until it is closed. (Figure 5)
Two, the use of nano water meter
1 slide down the front panel to start the spray. (Figure 6)
2 in the distance of 10-15 cm by way of spraying round face. (Figure 7)
3 continue to use 60 seconds after the opportunity to automatically stop spraying.
4 when not in use, please slide the panel to close.
5 if you need to continue to use the panel to slide to the closed state and then slide down the front panel to start the spray, so the cycle.
Three, the use of facial massage
1 remember to use in the clean skin, facial and eye coated with a thin layer of cream, moisturizing cream or cream.
2 please hold both sides of the machine hand, you need to close the conductive metal to start the anion energy. (Figure 8)
3 gently massage the skin on the head can begin to massage the face, slowly and gently in the face of the key part of the massage head, and gently press the eye. (Figure 9)
4 as long as no pressure, the machine will automatically stop massage. After use. Use a cotton pad to gently clean the massage head

FAQ

Q1. Are you a manufacturer or a trading company?

• We are a manufacturer, providing OEM & ODM service.Our factory is BSCI audited . 

Q2. What's your main markets?

•  USA, Europe, Japan,etc.

Q3. What is the delivery date for a sample?

• Usually about 1-3 days for items with general requirements.

Q4. Are your products conforming to our standards?

• Yes, our products have got many certifications, e.g.: CE, RoHS, PSE, ETL,FCC, SAA, KCC , CB, KC, KEMP, C-TICK, etc.  Please check with us exact certifications you need. 

Q5. How do you control the quality ?

• We control the product quality by IQC, three tests on production lines, and 100% aging testing before packaging. 

Q6. What's MOQ?

• MOQ is 500PCS, but 1000 pcs for new models. Of course, we could accept small trial orders for certain items.

Q7. Can you give us a favorable discount ?

• Of course, a favorable discount will be offered if the quantity is sizable.

Q8. How do you ship the goods and how long does it take?

 

• We usually ship by DHL, UPS, FEDEX,TNT. It usually takes 4-5days to arrive. By air,bysea are also acceptable. 

 Q9. What about the warranty of your products?   .     

          We offer 12 months warranty for all the products.