Zanshare DIY Resin River Table Flatback Crystals Rhinestones Glue Fix Epoxy Resin for Tabletop
China Zanshare DIY Resin River Table Flatback Crystals Rhinestones Glue Fix Epoxy Resin for Tabletop, Find details about China Casting, Furniture from Zanshare DIY Resin River Table Flatback Crystals Rhinestones Glue Fix Epoxy Resin for Tabletop
Zanshare casting resin is a professional grade, high-performance, ultra-clear, self leveling, and high gloss epoxy resin coating. It creates a durable protective barrier up to 2 inches thick.
Zanshare casting resin is a high performance casting epoxy resin, formulated for a low exothermic heat buildup, an extended pot life and gel time. that cures to a crystal clear, UV resistant, glass-like finish.
Application:
100% Solid Zanshare Epoxy Floor Coating is Recommended for:
- Sealing your wooden tabletop.
- Making a river table.
- Re-coloring your current table.
- Casting a new bar table.
- Making serving trays.
- Coasters.
- Making a new kitchen top.
- Pouring objects in moulds.
- Casting a new side table.
Description:
Casting Epoxy Resin Coating is a two-component curing coating at room temperature. Component A is epoxy resin, and component B is a solvent-free epoxy curing agent.We use only the finest 100% Solids Epoxy products with Low or zero VOC (Volatical Organic Content).
This is the epoxy casting resin you need to create beautiful pieces of art. Due to its main property a fast curing time for thicker layers it is easy to create epoxy resin project in short amounts of time. Create beautiful masterpieces yourself!
Super easy mixing ratio!
Features:
--Pours up to 2" thick
--No odor
--100% solids
--High-gloss
--Impact resistant
--UV resistant
--Blush resistant
--Improves surface appearance
--Crystal clear
--Self leveling
--Water resistant
Clear Epoxy Resin For Wood Table Top Coating
Pls refer to below chart,this is for your reference.
Coverage:
1/8" pour: 12.8 sq. feet per gallon
1/4" pour 6.4 sq. feet per gallon
1/2" pour 3.2 sq. feet per gallon
1" pour 1.6 sq. feet per gallon
2" pour 0.8 sq. feet per gallon
product properties:
---Processing time of the product is 60 minutes at 20 degrees.---The maximum layer thickness is set to a maximum of 5 centimeters.
--After 24 hours dust dry. Overcoatable after 36 hours.
--Full cure time is 7 days.
--Sandable after 3 days at 20 degrees.
--To cast a surface of 1 m2 with 1mm you need 1 kg.
--After curing the surface has a hardness of 86 on the Shore-D scale.
--Because of this hardness, the surface has a scratch-free finish. (High degree of Scratch Resistance)
TIP: Use the Zanshare Table Top epoxy to seal your table after the big pour for a high gloss result.
Technical Parameters
Part | 3230A | 3230B |
Color | Transparent | Transparent |
Specific gravity | 1.05 | 0.96 |
Viscosity (25ºC) | 1000-2000CPS | 150 MAXCPS |
Mixing ratio | A: B = 100:33(weight ratio) | |
Hardening conditions | 25 ºC×8H to 10H or 50ºC×2H (2 g) | |
Usable time | 25ºC×60min (100g) | |
Construction reference:
STEP 1: Measure and Mix: While most of our resin mix 3:1, we do have special epoxy resins that are 2:1 ratio and 1:1 ratio. Either way, a very important step is accurately measuring the resin and hardener. Placing them inside clean containers is just as important. Scrape the side wall and bottom to mix in all of the material.
STEP 2: Prep then Pour: If you have a porous material, you will need a seal coat (epoxy resin) prior. This helps prevent unwanted air bubbles from rising. After your projects is prepped or sealed properly, then we add the flood coat of epoxy resin.
STEP 3: Remove Air Bubbles with Heat: Pop those unwanted bubbles with a torch. We recommend a plumber's torch or a commercial heat gun. Simply wave the heat side to side (few inches away). The heat will release the bubbles instantly. Once your desired look is achieved, the epoxy resin is typically dry in 12 hours and cured in about 72 hours.
The Casting Epoxy Coating consists of :
- A- Component Epoxy
- B-Component Hardener
Our Package:
We accept OEM&ODM both for label and packages.And our normal package support: 1/5/20/25/200kg. Mostly is 5kg per bottle 20kg per set. The gross weight is 22kg and 0.05CBM.
Color Pigments
At present we have got below color pigments to mix with our casting resin ,that is:
--Solid color pigments in paste
--Transparent color dye
--Glitter
Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.
Factory introduction:
FQA
Q: Can I be your agent?
A: Sure, we are looking for agent all over the world.Q: Sample is free?
A: Yes, we provide free samples (400g) , customer only need to pay the freight.
Q: What's the payment?
A: We prefer T/T 30% deposit in advance, 70% balance T/T before the shipment!
Q: What is the min. order quantity?
A: MOQ is 300 kg/ color.
Q: What is the delivery time?
A: Within 10 days since received the deposit.
You Might Also Like
Best Selling 50kg High Quality Electronic Digital Hanging Ha......
Fuller Auxiliary Box High / Low Gear Synchronizer (A-5056) H......
Hydroponic Farm Fertilizer Tank pH/Ec Monitor Automatic Digi......
Industrial Motorized Electric Actuated Ball Valve Manufactur......
Halal and Kosher Cert No Shell Walnut Light Halves Walnut
Garlic Flavor Fried Fava Bean Chips with Brc
Block Making Machine Qt8- 15D Concrete Molds Block Brick Mac......
HS Code Heavy Duty ISO 17712 High Security Bolt Seal
Pen Drive 16GB OEM Nylon Rope USB Drives Lanyard Custom USB ......
LED Concert Scene Background LED Display Screen
330ml 500ml 1.5L Pet Water Bottle Blowing Making Machine
Buttons Laser Marking Machine (DW- F10W )