Products

Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

China Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant, Find details about China Silicon Gel to Make PCB Water Repellent, Silicon Rubber to Make PCB from Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

Model NO.
Hy90series, HY93series, HY210, HY215
Shrinkage
Less Than 0.2%
Color
Adjustable
Place of Origin
Shenzhen, China
Type of Company
Factory
Trademark
Hong Ye Silicone rubber
Transport Package
25kg/Drum, 200kg/Drum
Specification
FDA, RoHS, MSDS, SGS, ISO9001: 2000
Origin
China
HS Code
39100000
Model NO.
Hy90series, HY93series, HY210, HY215
Shrinkage
Less Than 0.2%
Color
Adjustable
Place of Origin
Shenzhen, China
Type of Company
Factory
Trademark
Hong Ye Silicone rubber
Transport Package
25kg/Drum, 200kg/Drum
Specification
FDA, RoHS, MSDS, SGS, ISO9001: 2000
Origin
China
HS Code
39100000
   Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant
  1. Description
    HY-9325 RTV-2 Silicone Potting is a newly insulating material silicon of silicon compounds.
    It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system. 
    Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

    Application
    HY-9325 is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. 
    Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

    Technical Parameters  
    ModelColorViscosity
    (cps)    		Hardness
    (A°)    		Mixing
    ratio    		Operating
    Time(min)    		Curing
    Time(hr, 25ºC)
    HY-9325Water clear500±10025±51:130~604~5






    Operation instructions
    1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
    2, Weight Ratio: part A: part B = 1:1 
    3, Deaeration the mixture under 0.08 MPa for 3 minutes.
    4, The temperature influences the curing time: When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

    Warm tips :
    1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
    Condensation silicone which not completely cured or organic tin compounds
    Sulphur, sulfide and sulfur rubber materials.
    Amine compounds as well as contains the amine materials.
    Pewters solder flux.
    2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
    3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
    4. When it gets stratified after a period of storage, Please mix 9325 evenly before using, it does not affect the performance.

    Package
    20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
    200KG/drum packing for part A +200KG/drum packing for part B 
    Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

    Shelf life
    1. Eighteen(18) months from date of shipment when stored at 24C in original unopened packages.
    2. This kind of product is non-dangerous product, it can be transported as general chemicals.
    3. Products exceed the storage life should be confirmed normal before
  2. Why choose us
 
  1. 1, Long history and solid foundation
      With 21 years of development history and good reputation, our products are exported to 138 countries around the world and exported since 2006.
  2. Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

    2, High-end research and development
    Being a leading liquid silicone manufacturer(6000 square meter factory )
     in China, we have a professional R&D team and QC team(12 experts ) and our product is FDA, SGS, RoHS, MSDS, ISO, REACH, UL approved, so there is no need to worry about the quality.And we have 14 years on alibaba, 12 years on  a trustworthy company
  3. Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant
     
  4. Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant




    3, Efficient service
       We can provide free training of silicone technique and free silicone samples. we have a professional sales team who will solve your problems patiently. Besides, with efficient logistics distribution system, you could get you goods earlier. Last, good after-sales service,we build long term cooperation relationship, once there is quality problem, we could solve right away. More importantly, return and exchange are accepted while quality problems occurred
  5. Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant
    Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant
     
  6. Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant
    Two Parts Glue Silicone Rubber Cover on Surface of PCB Water Repellent Soft Moisture Resistant

     

You Might Also Like