Products

Blacktrol 400 Gilosnite Hpht Filtration Control for Oil Based Mud

China Blacktrol 400 Gilosnite Hpht Filtration Control for Oil Based Mud, Find details about China Gilsonite, High Temperature from Blacktrol 400 Gilosnite Hpht Filtration Control for Oil Based Mud

Model NO.
DFS07-019
Model NO.
DFS07-019

Product Description

BLACKTROL® 400 gilsonite is a naturally occurring asphalt used for high temperature, high pressure (HPHT) filtration for all oil-based mud and synthetic-based mud. BLACKTROL® 400 is designed to be used in applications where the BHST above 400°F(204ºC). It can extrude into formation microfractures to form a sealing/plugging mechanism to stabilize shale and prevent sloughing. BLACKTROL® 400 also increases viscosity, especially at lower temperatures due to its partial solubility. When it is used in the field, monitor solids control equipment for several circulations after initial addition to ensure the product is not being discarded.

Applications/Functions

  • Reduce API and HPHT fluid loss in all oil-based mud
  • Stabilize shales and prevent sloughing
  • Enhance emulsion and thermal stability

Advantages

  • For use in ultra-high temperature applications BHST >400°F (204ºC)
  • Effective stabilize brittle shales and reduce washout in interbedded sand sequences
  • Helps to provide optimum sealing and filter cake deposition
  • No fluorescent product

Typical Properties

  • Appearance: Black powder
  • Soften point: 365-420°F (185-215ºC)
  • Specific gravity: 1.06

Recommended Treatment

  • A typical range is 2-10 ppb (5.7-28.5 kg/m3). Pilot testing is advised to determine the necessary treatment to achieve the desired results and to observe the change in mud properties

Package

  • 25 KG SACK
Blacktrol 400 Gilosnite Hpht Filtration Control for Oil Based MudBlacktrol 400 Gilosnite Hpht Filtration Control for Oil Based MudBlacktrol 400 Gilosnite Hpht Filtration Control for Oil Based MudBlacktrol 400 Gilosnite Hpht Filtration Control for Oil Based Mud
Section 7 Filtration Control Agents
Reduce infiltration of the liquid phase of the drilling fluid. 
No.Product CodeSHARKProduct DescriptionApplications/Functions
30DFS07-001SHARKPAC® LLow Viscous Polyanionic Cellulose Filtration Control Agent for water based mud with minimal viscosity increase up to 300°F
31DFS07-002SHARKPAC® RHigh Viscous Polyanionic Cellulose Filtration Control and viscosifier agent for water based mud up to 300°F
32DFS07-003SHARKCMC® LLow-viscosity, technical grade sodium carboxymethyl cellulose for filtration control Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase, salinity tolarant to 50,000ppm 
33DFS07-004SHARKCMC® HHigh-viscosity, technical grade sodium carboxymethyl cellulose for filtration control and supplemental viscosity Filtration Control and viscosifier agent for water based mud up to 250°F, salinity tolarant to 50,000ppm 
34DFS07-005SHARKSTAR®Pregelatinized modified starch Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase
35DFS07-006SHARKSTAR® HTModified polysaccharide/ tapioca starch Filtration Control Agent for water based mud up to 325°F with minimal viscosity increase
36DFS07-007SHARKSTAR® NHydroxypropyl carboxymethyl starch/Cross-linked starchReduce filtration in reservoir sections up to 300°F
37DFS07-008COPOTROL®Sodium polyacrylate copolymer High-temp fluid loss and rhelogy stabilizer for low calcium, low solids or non-dispersed muds up to 400°F
38DFS07-009WHITEMP®AAM-AMPS copolymer HPHT filtration control for WBM up to 400°F, white free-flowing powder 
39DFS07-010WHITETROL® XAM - AMPS copolymer HPHT filtration control for WBM up to 500°F, white free-flowing powder
40DFS07-011BLACKLEO®Highly-oxidized leonarditeHigh-temp WBM fluid loss, thinner, emulsifier for oil in water emulsions up to 400°F
41DFS07-012BLACKFLO®Sulfonated LigniteHighly sulfonated lignite polymer for HT WBM fluid loss, thinner, soluble in high brines,combination with BLACKTEMP for best performance up to 400°F
42DFS07-013BLACKTEMP®Sulfonated methypheuo formald-ehyde for freshwater and brine fluids High-temp fluid loss control with minimal rheology increase used for freshwater and brine fluids up to 450°F. Salinity tolerant to 120,000ppm and calcium resistant to 2000ppm, dark brown powder
43DFS07-014BLACKTEMP® PLUSSulfonated methypheuo formald-ehyde for saturated brine High-temp fluid loss control with minimal rheology increase used for saturated brine and formate brine up to 400°F. Salinity tolerant to 120,000ppm and Ca ion resistant to 2000ppm, dark brown powder
44DFS07-015BLACKNEX®Resinated LigniteHigh-temp fluid loss control and rheology stabilizer for all WBM up to 425°F with chlorides below 70,000ppm and hardness not exceeding 3,000ppm
45DFS07-016BLACKLIGO 400®Organophilic leonarditeHPHT filtration control for OBM up to 400°F, alternative to asphalt and gilsonite products 
46DFS07-017BLACKLIGO® 500Organophilic leonarditeHPHT filtration control for OBM up to 500°F, alternative to asphalt and gilsonite products
47DFS07-018BLACKTROL® 350Gilosnite - Soften point 350°FHPHT filtration control for OBM, soften point >350°F 
48DFS07-019BLACKTROL® 400Gilsonite -Soften point 365-420°FHPHT filtration control for OBM, Soften point: 365-420°F
49DFS07-020BLACKTROL® HPEmulsified gilsonite - Soften point 250-420°FHPHT filtration control for WBM, excellent dispersion, Soften point: 250-420°F
50DFS07-021BLACKSULA®Sulfonated Asphalt - EconomicalHPHT filtration control for both WBM and OBM up to 350°F, shale stabilizer. Prevent shale hydration and sloughing as well as decrease cuttings erosion
51DFS07-022BLACKSULA® PLUSSulfonated Asphalt - PremiumShale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control in both WBM &OBM up to 500°F. Partially soluble in water and oil, star product for 35 years. 
52DFS07-023LIQUITROL®Liquid polymer for OBMLiquid filtration reducer in NAF up to 350°F. Reduce the requirement of organoclay
53DFS07-024PURETROL®Cross-linked polymer for OBMPrimary filtration control agent for HPOBM up to 300°F, alternative to amine lignite and gilsonite,white powder
54DFS07-025PURETROL® HTCross-linked polymer/Vinyl toluene-acrylate copolymerPrimary filtration control agent for HPOBM up to 500°F, alternative to amine lignite and gilsonite,white powder
55DFS07-026NMSHIELDTMNANO-Technology particlesVersatile product to provide HT filtration control, improved fluids lubricity, strengthen wellbore and increase fracture breakdown pressure in sandstones and shales for both WBM and OBM up to 450°F. D50 is only 5nm.
56DFS07-027LIQUITROL® HTLiquid polymer for OBMLiquid filtration reducer in NAF up to 400°F. Reduce the requirement of organoclay.

 

You Might Also Like