Clay Brick Burning Machine Use Aggregates Stones
China Clay Brick Burning Machine Use Aggregates Stones, Find details about China Block Machine, Clay_Brick_Machine from Clay Brick Burning Machine Use Aggregates Stones
Basic Info.
Model NO.
QTS5-10
Trademark
shanman
Specification
QTS5-10
Origin
China
HS Code
8474809090
Model NO.
QTS5-10
Trademark
shanman
Specification
QTS5-10
Origin
China
HS Code
8474809090
Product Desciption
1.Introduction
The block machine is controlled by PLC system. By operating its computer interface, the random signal analysis, fault diagnosis and parameter setting-up of all kinds of materials can be achieved easily.
The material stock hopper and the material feeding hopper are separated, to each other, for the purpose of quantitative feed of materials, which can effectively control some clay ahead of liquefied and reduce the feeding time.
Trailing feeding system adopt the multi stirring fork, the mould case can slosh before and after quickly, in order to put the materials full the bottom of the mould case fast.
Wide adaptability, this block forming machine can change different molds due to the needs of customers.
2.Details information
3) the most versatile of the market, for enable varied models of lego blocks,U panel blocks,interlocking blocks and paver floors,mould can be change according to buyer's requirements,without the need to buy another machine.
4) Manufactured with precision in a machining center, its interior receives a thermal treatment and is rectified.
5) High productivity.12,000-18,000 blocks per day.
6) Double oil cylinder makes the brick much strong.
3. QTS5-10 Details
4. Capacity
5. QTS4-10 clay brick machine Features
6. Whole line
7. Blocks this machine can make:
8. Applications:
9. Details
1.Raw material ratio:
Method one: 5% cement + clay
Method two: 8% cement + clay
Method three: 10% cement + clay
Method four: 10% cement + sand + water
2.Types of bricks can be produced by the machine
interlocking brick,
paver brick with different sizes.
Other different bricks by changing different mould.
3.What models of the machines can be choosed for customers?
full automatic ,
semi automatic,
manual mode,
Mobile mode,
egg laying mode
10. Our Services
Pre-sales Service
(1) Professional suggestions (raw material matching, machine selection, the condition of building factory,
feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) 24 hours on-line service
(4) Welcome to visit our factory and production line anytime.
(5) Introduce the company file, product categories and production process.
(6)Sample testing support.
Sale
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale
(1) Training how to install the machine, training how to use the machine.
(2) Engineers available to service machinery overseas.
(3) Recall clients regularly ,get feedback in time,keep well communication with each other
11. Shipping and delivery
12. Questions you may have
1) What is the Raw Material of Block Making Machine?
Our Equipment is Concrete Block Making Machine.The Raw Materials of Concrete are Water, Cement, Sand, Stone Powder, Fly Ash, Slag etc..
2) Which one Block Making Machine is more suitable for me?
The Models of our Block Making Machine are QT10-15,QT8-15,QT4-15,QT4-185,QT4-24,QT4-26,QT40-,QT40-2each model has different Configuration.Our company also owns 10-15 Concrete Block Making Machine and 6-30 Mobile Concrete Block Making Machine.Which one of machines is right for me?The following questions should be carefully considered by yourself.Firstly,what Block Size do you want make?How many Blocks do you want make per day?What is your budget for this block machine project.We can choose the suitable model and configuration for you if above information can be provided.
The block machine is controlled by PLC system. By operating its computer interface, the random signal analysis, fault diagnosis and parameter setting-up of all kinds of materials can be achieved easily.
The material stock hopper and the material feeding hopper are separated, to each other, for the purpose of quantitative feed of materials, which can effectively control some clay ahead of liquefied and reduce the feeding time.
Trailing feeding system adopt the multi stirring fork, the mould case can slosh before and after quickly, in order to put the materials full the bottom of the mould case fast.
Wide adaptability, this block forming machine can change different molds due to the needs of customers.
2.Details information
1) 5-10 brick making machine is our newest clay and cement brick making machine. Equipped automatic control box, material feeding, brick molding and conveying all are automatically,brick will be made in 5-8 seconds.
2) You can chose diesel engine or motor by your local electricity.3) the most versatile of the market, for enable varied models of lego blocks,U panel blocks,interlocking blocks and paver floors,mould can be change according to buyer's requirements,without the need to buy another machine.
4) Manufactured with precision in a machining center, its interior receives a thermal treatment and is rectified.
5) High productivity.12,000-18,000 blocks per day.
6) Double oil cylinder makes the brick much strong.
| QTS5-10 hydraulic interlocking block machine | ||||
| Overall size | 2320×1250×2100mm | |||
| Shaping cycle | 5-8 seconds | |||
| Power | 7.5 KW | |||
| 15 Hp diesel engine | ||||
| Pressure | 16 Mpa | |||
| Total weight | 1700 KGS | |||
| Capacity | 8000-10000pcs | |||
4. Capacity
| Capacity | |||||
| No. | Block photo | Block size | Pcs/mold | Pcs/day | Weight |
| 1 |  | 300x150x100mm | 5 | 8000-10000 | 4.5 kgs |
5. QTS4-10 clay brick machine Features
1) Function
Full automatic hydraulic hydraform adobe blocks making machine can produce various interlocking bricks by changing moulds.
2) Advanced technology
Hydraulic pressure technology is adopted by this machine, the pressure can be as high as 60Mpa, so the blocks produced are of good quality, large density and high strength.There are two oil cylinder on top mould and one oil cylinder under down mould, up and down press at same time, the brick is much stronger.Adopt the plunger pump and proportional valves, the pressure is double.
3) High quality mould
All mould use precise wire cutting and carburizing heat treatment to prolong its service life.The machine frame is made of special thick steel and using special welding techniques. The whole machine is strong.
There is the touch screen attached in PLC control box, can adjust the pressure through the touch screen, it is so easy.Adopt the proportional valves, can adjust the pressure through PLC control system.Full automatic hydraulic hydraform adobe blocks making machine can produce various interlocking bricks by changing moulds.
2) Advanced technology
Hydraulic pressure technology is adopted by this machine, the pressure can be as high as 60Mpa, so the blocks produced are of good quality, large density and high strength.There are two oil cylinder on top mould and one oil cylinder under down mould, up and down press at same time, the brick is much stronger.Adopt the plunger pump and proportional valves, the pressure is double.
3) High quality mould
All mould use precise wire cutting and carburizing heat treatment to prolong its service life.The machine frame is made of special thick steel and using special welding techniques. The whole machine is strong.
6. Whole line
7. Blocks this machine can make:
8. Applications:
9. Details
1.Raw material ratio:
Method one: 5% cement + clay
Method two: 8% cement + clay
Method three: 10% cement + clay
Method four: 10% cement + sand + water
2.Types of bricks can be produced by the machine
interlocking brick,
paver brick with different sizes.
Other different bricks by changing different mould.
3.What models of the machines can be choosed for customers?
full automatic ,
semi automatic,
manual mode,
Mobile mode,
egg laying mode
10. Our Services
Pre-sales Service
(1) Professional suggestions (raw material matching, machine selection, the condition of building factory,
feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) 24 hours on-line service
(4) Welcome to visit our factory and production line anytime.
(5) Introduce the company file, product categories and production process.
(6)Sample testing support.
Sale
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale
(1) Training how to install the machine, training how to use the machine.
(2) Engineers available to service machinery overseas.
(3) Recall clients regularly ,get feedback in time,keep well communication with each other
(4) One year guarantee
11. Shipping and delivery
12. Questions you may have
1) What is the Raw Material of Block Making Machine?
Our Equipment is Concrete Block Making Machine.The Raw Materials of Concrete are Water, Cement, Sand, Stone Powder, Fly Ash, Slag etc..
2) Which one Block Making Machine is more suitable for me?
The Models of our Block Making Machine are QT10-15,QT8-15,QT4-15,QT4-185,QT4-24,QT4-26,QT40-,QT40-2each model has different Configuration.Our company also owns 10-15 Concrete Block Making Machine and 6-30 Mobile Concrete Block Making Machine.Which one of machines is right for me?The following questions should be carefully considered by yourself.Firstly,what Block Size do you want make?How many Blocks do you want make per day?What is your budget for this block machine project.We can choose the suitable model and configuration for you if above information can be provided.
3) How could we buy machine from us?
Our company will sign Sales Contract or Proforma Invoice with you by Email,Fax or Mail after confirming the Equipment that you want to buy; or we can make invoice on made in china plate form our company will arrange Equipment and Mould Production after receiving your 30% deposit.The balance should be paid when the production is finished.Then we will arrange delivery to your closest Sea Port where you can take over the Equipment.
Our company will sign Sales Contract or Proforma Invoice with you by Email,Fax or Mail after confirming the Equipment that you want to buy; or we can make invoice on made in china plate form our company will arrange Equipment and Mould Production after receiving your 30% deposit.The balance should be paid when the production is finished.Then we will arrange delivery to your closest Sea Port where you can take over the Equipment.
4)How could we take over the Equipment?
At present our customers come across more than Eighty Countries around the world.They are using our machine,but most of our machine spread in Africa,Middle East,Southeast Asia, Eastern Europe and South America.We will book the Container from the Ship Company when the production is finished.Then the truck will take the Container to our factory for loading,be back to port after finish loading.The Ship Company will transport the Container to designated port where the customers can take over the machine.We also can be responsible for transporting the Equipment to Inland City,but according to our previous experiences,it will be saving transport costs if customers can cover the Inland Transport by yoursel
At present our customers come across more than Eighty Countries around the world.They are using our machine,but most of our machine spread in Africa,Middle East,Southeast Asia, Eastern Europe and South America.We will book the Container from the Ship Company when the production is finished.Then the truck will take the Container to our factory for loading,be back to port after finish loading.The Ship Company will transport the Container to designated port where the customers can take over the machine.We also can be responsible for transporting the Equipment to Inland City,but according to our previous experiences,it will be saving transport costs if customers can cover the Inland Transport by yoursel
You Might Also Like
30-50cbm Movable Hopper for Discharging Bulk Cargo
4b-Wd Bsp Male ED Sealing Plug
Standard Specimen Clamp for Microtome
Luxury Crystal Glass Scent 30ml 1 Oz Perfume Bottle
Tetra Pak Sugar Dissolving System
High Quality Factory Supply Zinc Plated Pozi Countersunk Chi......
Improve Root System Root Promoter Seaweed Functional Organic......
Creative Handmade Three-Dimensional Photo Frame Outside Thic......
Jinko Panel High Quality Pmw Dimming Controller Ni-MH Batter......
80/20 Copper Nickel ( CuNi20 )
Natural Blue Gemstone Stone Oval Vanity Hotel Wash Basin Sin......