China FTTH Horizontal 48 Core Fiber Optical Splice Joint Closure, Find details about China Fiber Optic Closure, Wall Mount Fiber Enclosure from FTTH Horizontal 48 Core Fiber Optical Splice Joint Closure
Basic structure and configuration
Outside dimension (LxWxH) | 340×150×70 (mm) |
Weight (excluding outside box) | 1500g-2000g |
Number of inlet/outlet ports | 2 (pieces) on each side (total 4 pieces) |
Diameter of fiber cable | Φ8-Φ16 (mm) |
Capacity of FOSC | Bunchy: 12-48(Cores) Ribbon: max. 72(Cores) |
Main components
No. | Name of components | Quantity | Usage | Remarks | |
1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter: 270×100×60 (mm) | |
2 | Fiber optic splice tray (FOST) | max. 2 pcs (bunchy) max.2 pcs (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:3 (pieces) | |
3 | Foundation | 1 set | Fixing reinforced core of fiber- cable and FOST | ||
4 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | ||
5 | Port plug | 4 pieces | Sealing empty ports | ||
6 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement | |
7 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing connection | Configuration as per requirement |
Main accessories and special tools
No. | Name of accessories | Quantity | Usage | Remarks |
1 | Heat shrinkable protective sleeve | Protecting fiber splices | Configuration as per capacity | |
2 | Nylon tie | Fixing fiber with protective coat | Configuration as per capacity | |
3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing | |
4 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
5 | Hanging hook | 1 set | For aerial use | |
6 | Earthing wire | 1 piece | Putting through between earthing devices | |
7 | Abrasive cloth | 1 piece | Scratching fiber cable | |
8 | Labeling paper | 1 piece | Labeling fiber | |
9 | Special wrench | 3 pieces | Fixing bolts, tightening nut of reinforced core | |
10 | Buffer tube | to be decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
11 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air. |