China 24 Lt Dezhi Horizontal Bladder Membrane Water Pump Tanks for Domestic Pumps, Find details about China Water Pump Tanks, Water Pressure Tanks from 24 Lt Dezhi Horizontal Bladder Membrane Water Pump Tanks for Domestic Pumps
The Dezhi Potable Blue Expansion Vessels are built from different materials than Red Heating Expansion Vessels to ensure that the water is contaminant free and safe for human consumption. The most common use for a blue expansion vessel in a potable application such as an Unvented Water Heater or a Pumped System. Expansion Vessels operate on the basis that the internal chamber is separated by a rubber membrane, inside this membrane sits the water and surrounding this sits a pocket of air. As the water inside the sealed system is pressurised, as water is non compressible, the air inside the air chamber of the Expansion Vessel will become compressed thus leaving the system safe from over pressurisation. Expansion Vessels are commonly used on pumped systems to remove the requirements of a continuous pump. This works as the user will set a low and high pressure on the pump settings, when the water pressure reaches the lowest setting the pump will engage and fill the Expansion Vessel to the high pressure point and stop. Once this cycle has been completed the Expansion Vessel puts the stored water under pressure ensuring higher pressure water. This will continue until the Expansion Vessels pressure drops to the lower point and the pump starts its cycle again.
All Water Dezhi Series expansion vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the expansion vessel or pressure loss in the water system.
The main purpose of an expansion vessel is to compensate for the increase in volume of water due to the varying water temperatures in hot water or heating systems. When water is heated it expands and as water is not compressible this increased volume will create a rise in pressure within the system. As an example, water being heated from 0°C-100°C will increase by approx 4.5%.
The expansion vessel allows for this extra space, as when water temperature increases the membrane inside the vessel inflates to allow the water to fill the vessel. The membrane will continue to expand until the system reaches its maximum temperature. Once this has been reached the membrane will be fully inflated and takes up the capacity of the vessel shell. Gradually the temperature will drop, which will in turn decrease the volume of water. Due to the pressure from the pressurised air surrounding the membrane, water will start to exit the vessel until the membrane is deflated.
The pressure vessel is designed to provide a storage facility and pressure reservoir for water. Common uses are in water booster sets, heating pressurisation and fill sets. Vessel's are supplied pre-charged, but the pressure may require adjustment to suit the site conditions. This adjustment must be made with the vessel isolated from the system, and before filling with water. All pressure vessels should be installed with an isolating valve and drain cock.
Photo | Model | Warranty | Vessel Capacity | Unit Price | Connection | Height | Length | Max. operating pressure | Standard Precharge Pressure | Max. operating temperature | Unit Package Dimension | |||
X | Months | Liter | US Dollar | Inch | mm | mm | Bar | Bar | °C | mm | ||||
TY-08-2L-10 | 36 | 2 | Come On,Please Contact US For Best Offer (Export Only) | 3/4'' | 130 | 230 | 6 | 0.9 | 70 | 150x150x240 | ||||
TY-08-5L-10 | 36 | 5 | 3/4'' | 205 | 240 | 10 | 1.5 | 100 | 210x210x250 | |||||
TY-08-8L-10 | 36 | 8 | 3/4'' | 205 | 297 | 10 | 1.5 | 100 | 210x210x320 | |||||
TY-08-12L-10 | 36 | 12 | 1'' | 270 | 350 | 10 | 1.5 | 100 | 280x280x370 | |||||
TY-08-19L-10 | 36 | 18 | 1'' | 305 | 430 | 10 | 1.5 | 100 | 315x315x440 | |||||
TY-08-24L-10 | 36 | 24 | 1'' | 305 | 485 | 10 | 1.5 | 100 | 315x315x495 | |||||
TY-08-36L-10 | 36 | 36 | 1'' | 376 | 440 | 10 | 1.5 | 100 | 400x400x450 | |||||
TY-08-50L-10 | 36 | 50 | 1'' | 380 | 585 | 10 | 1.5 | 100 | 395X395X600 | |||||
TY-08-60L-10 | 36 | 60 | 1'' | 385 | 670 | 10 | 1.5 | 100 | 400x400x685 | |||||
TY-08-80L-10 | 36 | 80 | 1'' | 430 | 725 | 10 | 1.5 | 100 | 440X440X740 | |||||
TY-08-100L-10 | 36 | 100 | 1'' | 490 | 700 | 10 | 1.5 | 100 | 530X530X700 | |||||
TY-08-150L-10 | 36 | 150 | 1'' | 585 | 820 | 10 | 1.5 | 100 | 600X600X830 | |||||
TY-08-200L-10 | 36 | 200 | 11/4'' | 628 | 920 | 10 | 2 | 100 | 640X640X940 | |||||
TY-08-300L-10 | 36 | 300 | 11/4'' | 680 | 1082 | 10 | 2 | 100 | 700X700X1100 |
Taizhou Tianyang Electrical co., LTD. Is located in Shangma industrial Zone, Shitang Town, WenlingCity, Zhejiang rovince, covering an area of 15, 000 square meters. Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company. We have produced pressure tank for more than 20 years. Available volumes range from 0.15 to 1500 liters. and working pressure from 4 bar to 25bar. Our products are applied to pump systems. Our products are exported to numerous overseas clients. We can custom design and manufacture products according to client-supplied requirements.
We adhere to the business philosphy"Credibility, Quality and service", our scientific management is based on the domestic market, but facing to the world. Warmly welcome customers both domestic and from abroad. We sincerely hope to cooperate and develop together to create a better future.
Taizhou Tianyang Electrical Co., Ltd. Is always your most loyal partner.
Model | Tank Volume | Maxi Working Pressure | Diameter | Length | Connector | Package (Paper Box) | Export Packing Size |
x | Liter | Bar | mm | mm | Inch | cm | Non-fumigation wooden case/Or Pallet |
TY-04-5L | 5 | 10 | 160 | 300 | 1 | 17x17x31 | |
TY-04-8L | 8 | 10 | 200 | 340 | 1 | 20x20x34 | |
TY-04-12L | 12 | 10 | 270 | 350 | 1 | 27x27x35 | |
TY-04-19L | 19 | 10 | 270 | 410 | 1 | 27x27x41 | |
TY-04-24L | 24 | 10 | 270 | 460 | 1 | 27x27x46 | |
TY-06-36L | 36 | 10 | 350 | 560 | 1 | 35x35x56 | |
TY-06-50L | 50 | 10 | 350 | 830 | 1 | 35x35x83 | |
TY-06-60L | 60 | 10 | 450 | 750 | 1 | 45x45x75 | |
TY-06-80L | 80 | 10 | 450 | 890 | 1 | 45x45x89 | |
TY-06-100L | 100 | 10 | 450 | 940 | 1 | 45x45x94 | |
TY-06-150L | 150 | 10 | 450 | 1100 | 1 | 45x45x110 | |
TY-07-180L | 180 | 10 | 560 | 1000 | 1 | 56x56x100 | |
TY-07-200L | 200 | 10 | 650 | 970 | 1 | 65x65x97 | |
TY-07-300L | 300 | 10 | 720 | 1260 | 1 | 72x72x126 | |
TY-07-500L | 500 | 10 | 750 | 1500 | 1 | 75x75x150 | |
TY-07-750L | 750 | 10 | 750 | 1800 | 1 | 75x75x180 | |
TY-07-1000L | 1000 | 10 | 1000 | 1800 | 1 | 100x100x180 | |
TY-07-1500L | 1500 | 10 | 1100 | 2000 | 1 | 110x110x200 | |
TY-07-2000L | Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only) | ||||||
TY-08-8L | 8 | 10 | 240 | 330 | 1 | 25x25x34 | |
TY-08-12L | 12 | 10 | 270 | 340 | 1 | 29.5x29.5x35 | |
TY-08-19L | 19 | 10 | 410 | 290 | 1 | 29.5x29.5x41 | |
TY-08-24L | 24 | 10 | 460 | 290 | 1 | 29.5x29.5x46 | |
TY-08-36L | 36 | 10 | 380 | 490 | 1 | 38x38x50 | |
TY-08-50L | 50 | 10 | 380 | 560 | 1 | 38x38x57 | |
TY-08-60L | 60 | 10 | 480 | 490 | 1 | 48x48x50 | |
TY-08-80L | 80 | 10 | 480 | 630 | 1 | 48x48x64 | |
TY-08-100L | 100 | 10 | 480 | 720 | 1 | 48x48x73 | |
TY-08-150L | Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only) | ||||||
TY-08-200L | |||||||
TY-08-250L | |||||||
TY-08-300L | |||||||
TY-08-400L | |||||||
TY-08-500L | |||||||
TY-08-600L | |||||||
TY-08-750L | |||||||
TY-08-1000L | |||||||
TY-08-1500L |
Regarding Installtion
The vessel is supplied pre-charged with air, but this pressure may require adjustment to suit the site conditions. This adjustment must be made with the vessel isolated from the system, and before filling with water. Air may be vented from, or pumped into, a patent valve which will be found under a black plastic screw-off cover on the shell (sizes up to and including 500 litre) or on a side mounted flange (750 and larger). It will be noted that vessels of 60 litre capacity or larger are manufactured with connections at either end of the vessel shell. The vessel should be mounted so that the system connection is made at the lowest possible point, to facilitate on-site maintenance. The other connection may be fitted either with a air bleed valve, or alternatively with a blanking plug. All pressure vessels should be installed with an isolating valve and drain cock.
Periodic Maintenance
The only maintenance required on this equipment is a periodic check on the air cushion pressure. It is necessary to isolate the vessel from the system, and to drain all water from the tank before making this measurement with a standard tyre pressure gauge from the valve.
Maintaince free models are also available,Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)
FAQ Details:
1. Q: What is your MOQ of this item?
A: We are a factory, have stock. 1PCS is ok!
2. Q: What is the delivery time?
A: 7-25 days after receiving orginal L/C or deposit by TT.
3. Q: Is it all right to make customer's own brand name?
A: Yes we supply OEM service. Please send us a authorization doc.
4. Q: Where is your Loading Port?
A: Ningbo, Zhejiang, China.
5. Q: What are your payment terms? For Bulk Quantity Purchase
A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
For Samll amount Trial Order, Please arrange the full payment
6. Q: What is your company's available production capacity?
A: 50000~60000 pieces of Pressure Tank per month.
Welcome To Visit Us
Please do not hesitate to contact me if you have any questions.
Yours Sincerely
Tom Lee
-----------------------------------------------------------
Tom Lee
Business Development Manager
Taizhou Tianyang Electrical Co., LTD
Ph: +86-21-57813120
Cell: +86-18917007187
Fax: +86-576-86818392
www. cndezhi. com