Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod

China Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod, Find details about China Round Rods and Bars, Square or Round Rods and Bars from Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod

Color
White, Black, Green, Nature, Blue, Yellow, etc
Shape
as Per Your Drawing
Packing
Cartons, Wodden Case, Pallet, Container
Breaking Elongation
> 300%
Abrasion
80, Steel = 100
Friction Coefficient
0.12-0.15
Impact Strength
131mj/mm2
Tensile
23-26
Trademark
XINXING
Transport Package
Pallet
Specification
5-200mm, or customized (Diameter)
Origin
China
HS Code
3920109010
Color
White, Black, Green, Nature, Blue, Yellow, etc
Shape
as Per Your Drawing
Packing
Cartons, Wodden Case, Pallet, Container
Breaking Elongation
> 300%
Abrasion
80, Steel = 100
Friction Coefficient
0.12-0.15
Impact Strength
131mj/mm2
Tensile
23-26
Trademark
XINXING
Transport Package
Pallet
Specification
5-200mm, or customized (Diameter)
Origin
China
HS Code
3920109010
Brief Introduction of corrosion resistance HDPE plastic round bar high density polyethylene rod:
Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene RodCorrosion Resistance HDPE Plastic Round Bar High Density Polyethylene RodCorrosion Resistance HDPE Plastic Round Bar High Density Polyethylene RodCorrosion Resistance HDPE Plastic Round Bar High Density Polyethylene RodCorrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod

Technical Data Sheet of corrosion resistance HDPE plastic round bar high density polyethylene rod:
PROPERTIESTest MethodUnitValue
I.Physical Properties
DensityISO 1183g/cm30.95~0.96
Water absorption 24hrsISO 62%0.01
II.Thermal Properties
Heat deflection temperature - HDT/AISO 75-2ºC55
Min. service temperature ºC-30
Max. service temperature-Long Term ºC90
Thermal conductivity at 23 ºCDIN 11359W/(K*m)0.42
Coefficient of linear thermal expansionISO 1135910-4*K-11.5
Flammability Rating(6mm thickness)UL 94-HB
III.Mechanical Properties at 23ºC
Tensile strength at yieldISO 527-2MPa27
Tensile strength at breakISO 527-2Mpa35
Elongation at breakISO 527-2%700
Modulus of elasticity after tensile testISO 527-2MPa1,000
Modulus of elasticity after flexural testISO 178MPa1,000
Hardness - Shore DDIN 53505 64
Charpy impact strengthISO 179kJ/m2N. B.
Friction coefficientDIN 53375 0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHzIEC 60250106Hz2.3
Dielectric loss factor at 1 MHzIEC 60250106Hz3.1
Volume resistivelyIEC 60093Ohm (Ω) * cm>1016
Surface resisivelyIEC 60093Ohm (Ω)>1015
Dielectric strengthIEC 60243-1kV/mm17
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
 
NameRound Solid UHMWPE Rod
MaterialPE,UHMWPE,HDPE
ColorWhite,black,green,nature,blue,yellow,etc
Diameter5-200mm,or customized
ConditionIn stock/Made to order
ShapeAs per your drawing
CertificationISO9001:2008
Free SampleAvailable
ShapeSheet, rod, tube, gear, rack,pulley, guide rail, Plastics fittings,and so on
AdvantageOne stop procurement
PackingPlastic bags,Cartons,Wodden case,Pallet,Container,etc.
Other24 hours instant and comfortable customer service.
Shipping status notification during delivery.
Regular notification of new styles & hot selling styles.

XINXING produce all kinds of UHMWPE rods icluding the round UHMWPE Rod and square UHMWPE Rod. Our UHMWPE bar can be various size according to customer requirements.

Green UHMWPE Bar, Red UHMWPE Bar, Yellow UHMWPE Bar, Black UHMWPE Bar, Blue UHMWPE Bar,etc .
All kinds of UHMWPE Bar is available with XINXING  Company.

Shandong Ningjin Xinxing Chemical Co.,ltd have nearly 15 years in manufacturing the HDPE and UHMWPE products. Our factory is the biggest and our sevrice is best.


Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod



Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod
Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod

Advantages of corrosion resistance HDPE plastic round bar high density polyethylene rod:

Excellent impact resistance

High mechanical strength

Resistant to many solvents

Fantastic electrical insulator

Splendidt abrasion resistance

High damping properties

Continuous use temp. of -269 to 80 Deg. Cent.

Minimum water absorption (0.01%)

Extremely low co-efficient of friction


Chemical resistance: UHMWPE is resistant to acids, salts & salt solutions, alcohols, oils, fats, waxes & many solvents.
All PE material is affected by strong oxidizing agents such as nitric acid, chromic acid or halogens.
Aromatics and Halogenated hydrocarbons cause swelling. 


Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod

Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod


About Shandong Ningjin Xinxing Chemical Co.,Ltd.

With the excellent experience of many years in manufacturing engineering plastics, Xinxing was established in 1989. Now, it becomes the largest and most professional manufacturer of Engineer plastics such as UHMWPE Sheetsground protection mats, crane outrigger pads, UHMWPE fender pads, wear-resisting liners, HDPE Sheets and parts, PP sheets and parts and other engineer plastics.

Our factory covers an area of 36000 square meters which has 7 big workshops for different products and application. Xinxing is the only manufacturer that produces both extruded and pressed plastic products in China and represents the most advanced productive forces and highest quality.

Our products are widely exported to many countries all over the world such as Indonesia, Malaysia, Korea, Japan, Russia, Germany, India, England, Italy, South America, Canada, Chile, etc.

Our management creed is "Quality first, Customer first, Keeping improving". We are willing to establish a wide and continuous cooperation with enterprises home and abroad. We sincerely hope to establish business relations with you.


Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod
Corrosion Resistance HDPE Plastic Round Bar High Density Polyethylene Rod


FAQ

Q1. Are you trading company or () manufacturer ?
A1. Yes,of course. We are factory.

Q2. Do you provide sample?
A2. Yes, we could offer  sample for free charge. But we are sorry that we do not pay the cost of freight.

Q3. How long is your  delivery time?
A3. It mainly is according your quantity. Generally, it is 10 days if products are in stock. However, it is 15-20 days if products are not in stock.

Q4. What is your terms of payment?
A4. In summary, payment term is flexible. We accept T/T, L/C, Paypal and other terms. We a should open to dicuss.

Q5. Is there any warranty on the quality of your  products?
A5. About this question, please don't worry. We have more than 20 years of experience in producing products widely used in Europe, Russia and other countries.

Q6. What about the after-sales service?
A6You may rest assured that the quality of our products is always excellent. In addition, we will fix completely if our products have any problems that bring you some trouble.

Q7. Do you have complete inspection facilities ?
A7. Yes, of course. We will check the quality of the goods strictly before they are packed.

Q8. Are the specifications of your products all fixed?
A8. No, we can manufacture products of special specifications according to your requirements.
 

We sincerely look forward to establishing business relationship with you. Please contact me if you have any other questions. I would like to help you in time.



Releated Products:
White & Black Diameter from 15mm to 200mm HDPE Extrusion Rod, HDPE PE ROD Manufacturer
White PE rod 20-500mm polyethylene block pe sheet extruder plastic sheet
Factory Directly Extruded Plastic Black/ White PE Rod 300mm large diameter HDPE Hard Plastic Rod


Custom size white polyethylene bar plastic pe rod
corrosion resistance HDPE plastic round bar high density polyethylene rod