Inconel 625 Plates, Sheet and Rods and Pipes

China Inconel 625 Plates, Sheet and Rods and Pipes, Find details about China Incoloy Pipe, Nickel Pipe from Inconel 625 Plates, Sheet and Rods and Pipes

Model NO.
Inconel 625
Special Use
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Application
Tool Steel Bar
Lead Time
Stock
Size
Customized
Trademark
without
Transport Package
Plastic Wraping
Specification
DN10~450
Origin
China
HS Code
76210000
Model NO.
Inconel 625
Special Use
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Application
Tool Steel Bar
Lead Time
Stock
Size
Customized
Trademark
without
Transport Package
Plastic Wraping
Specification
DN10~450
Origin
China
HS Code
76210000

Specifications
100% PMI;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test
Description & Name:  Inconel 625 pipe  UNS N06625 nickel alloy seamless tube ASME SB444 
Standard:   ASTM/ASME B/SB 444
Material: Inconel 600,625,617,690,693, Monel 400, Monel K500,Incoloy800/800H/800HT,825, Alloy20,Alloy28. Hastelloy C276,AL6XN,N08028 etc.
 
UNS N06625 Chemical Composition%          
Alloy DesignationElementCNiCrMnFeSiMoAlTiCo+TaPS
Inconel 625Min. %-5820---8--3.15--
Max. %0.1-230.550.5100.40.44.150.0150.015
 
 
Mechanical PropetiesInconel625
Density:8.4g/cm3
Melting Point: 1290-1350°c
Tensile Strength Min.(Mpa):690
Yield Strength Min. (MPa): 0.2% offset276
Elongation A 5%(min.): 30
HB Max.:220
 
Nominal Dia: 1/2 "to 10" NB for seamless pipe
Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS 
All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 
Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm)
Length:
30 m(Max) or as your requirement
Process: 
Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube

Finish: Annealed & pickled, bright annealing, polished
Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end 

Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
 
Inspection and Test Procedure
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination 
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test  (ET or UT) 
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6.Straightness Test  (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.
 
>>Seamless Pipe Production Facilities
 
>>Production Process
 
>>Laboratory Instrument  & Test Equipment